Recent content by TomP

We are building a bunded sprayer area with an underground tank (to take the capacity of the sprayer) and submersed pump to take contents to IBC biofilters. Anyone have any recommendations for a model of tank/supplier... tank would need to be designed to be underground as well as be able to...

We have had an illustrator friend help make a really good map of our farm with all the footpaths and bridleways as well as '7 reasons to keep to the footpath'. Hoping to get this printed and mounted in several locations with something weatherproof and sturdy. I appreciate nothing is bombproof...

Thanks for all your comments. Here is the updated list! Now I've just got to build it!:oops: Combine & header covered area - sheltered but open enough to try and avoid mice taking residence in Combine! Filling/washdown pad for sprayer (covered, drive through if possible) with primary holding...

Yes! Just slowly trying to move away from my Grandads 16x silos which are starting to show their age (1970s). We are building in levelled space for future grain storage expansion. Also some external storage.

Thanks Clive... weighbridge space considered, might be on the wish list for a few years. Any standard stats on artics (tip height and turning etc) - although I suspect designer should now this.

I'm an arable farmer but have access to pig slurry from next door farm over the hedge. We are moving into a regenerative farming system and I was hoping to compost a proportion of this pig slurry. Anyone have any experience of this? Thanks

We are relocating our arable farmyard. I'm working with the designers to get the right design and currently working on a list of things that we want to include. The list is below. Anything anyone feels like commenting on/adding would be really welcome: Combine & header covered area - sheltered...

Hi Clive, Saw this thread from 2013. I’m interested in a cross cutter carrier to help us make the move between conventional and no till... provide a bit of tilth for cover crop and winter cereal establishment with 750a. Did you end up getting one or have you had any further demos/experience/...

Our 4 metre JD 750a only has one coulter shut of per tramline and we wanted to increase to two coulters per tramline and avoid green straw at harvest. Any suggestions of a kit you can buy top do this. I think a valve by MC electronics might work... thnaks tom

We are hiring a Fendt 724 (year 2015) to use on our JD 750a drill for spring drilling. Wandering if anybody has this set up and if they have any tips for what compatibility issues (hardware and software) there might be. I think the hydraulic pump flow rate is 115l/min with 4 closed spools... Thanks