Toms820's latest activity
-
Morning, It’s finally time to change our old greenlands rf120 and we’ve been offered a 2013 case RB344 done 30,000 bales from a local... -
Toms820 replied to the thread Sheep scanning accuracy.So the scanner asked us when we chucked the rams in and then set the scanning date according to that which was about 70 days. It’s his...
-
So this is the first year we’ve ever scanned our sheep and so far the accuracy isn’t what I would call acceptable. I’ve lambed 19 sheep...
-
Looking to get a set of sheep shears for tailing and maggots. I’ve tried the Horner shearing zipper 2 and it was sh!t blew up after a...
-
Toms820 replied to the thread Lely optimo 240c skids.Yeah it’s the red/yellow ones will give them a call tomorrow
-
Anyone braking a lely optimo 240c mines a 1995 model. Looking for 3 skids local dealer recons they aren’t available anymore? Have...
-
-
Looking for a new motor cable for my shearing unit. Not sure on make due to being 60+ years old. Cable is 77inchs long. Have attached...
-
-
Toms820 replied to the thread Tw35 clutch woes.The clutch pedal is fine no stiff ness when pressing and never had to adjust it for free or play. To be honest I don’t have anything...
-
Toms820 replied to the thread Tw35 clutch woes.If it is a dual power problem? Is there the basics I could do to test or track down the fault? Is there maybe a solenoid to check?
-
Had to move my tw35 to put away for winter and on putting into gear and realising the clutch it tried to pull away then hesitated and...
-
So picked up a really cheap Massey 135 as a winter project. The front of the bonnet is all dented up but apart from that is usable. is...
-
