Valmetal Inc's latest activity
-
Valmetal Inc replied to the thread Straw blower/ grinder.Some machines prevent stones going out through the chute depending on design - straw blowers (differ from choppers or grinders) have... -
Valmetal Inc replied to the thread Straw blower/ grinder.Straw needs to be the width of consuming animals gullet so about 50 mm for a cow . The means a cow with readily eat the straw without...
-
Valmetal Inc replied to the thread Straw blower/ grinder.It increases fibre content while slowing down the rate of digestion allowing continued absorption of nutrients. Rumination is stimulated...
-
Valmetal Inc replied to the thread Straw blower/ grinder.Valmetal have support in Shropshire area machine is £25k
-
Valmetal Inc replied to the thread Straw blower/ grinder.
-
Valmetal Inc replied to the thread Alternatives to Sawdust.
-
Valmetal Inc replied to the thread Alternatives to Sawdust.I have a demonstration model in stock for £25k + vat
-
Valmetal Inc replied to the thread Alternatives to Sawdust.Agrichopper from Valmetal is a good option and cost effective for chopping straw
-
Valmetal Inc replied to the thread Straw blower/ grinder.Machines ex stock for delivery..
-
Valmetal Inc replied to the thread Straw blower/ grinder.Good machine long lasting, will chop fine for TMR, have references if your interested
-
Valmetal Inc replied to the thread Straw blower/ grinder.
-
Valmetal Inc replied to the thread Which straw bedder.Straw is often added to the diet of dairy cows for many reasons. It increases fibre content while slowing down the rate of digestion...
-
Valmetal Inc replied to the thread Which straw bedder.A ex demo Agrichopper is available for £19k . This machine has down 10 hrs work and will chop straw properly for diet feeding or for...
-
Valmetal Inc replied to the thread Which straw bedder.No electrics to go wrong .. all hydraulic or pto
-
Valmetal Inc replied to the thread Which straw bedder.No it’s not I have a machine on 600 cow full indoor herd since 2014 and I have only sold 1 set of knives and 1 bearing…it’s in use every...