Recent content by Will...

Cracked it! Thanks everyone for their assistance I'm running by the usb to serial port option via a null modem adapter using the GPS out link posted by @Andy26. The F9P and USB Serial Port cable is connected via an USB extender. Once the Tellus could see a signal it connected automatically...

I've got the AgopenGPS bit running well as a lightbar on a FZ-G1, I'm even picking up a RTK signal from close by without needing a base station. The RS232 Xbee module didn't come with anything, the only instruction were which way to plug it in written on the back of it! Ucentre is the most...

I’ve not got it working yet but I'm persevering. I’m going to speak to our KV dealer tomorrow whilst I’m in the tractor about what signal the Tellus requires as suggested earlier and see if I’m getting the right one. The usb way look easy to try, my tablet only has one usb port so I guess I...

Thankyou, I will have another go and report back the findings!

So far I have followed the following instructions from ardusimple: “You will have to enable the data that you want to be output via the RS232 Plugin. You can do this by configuring UART2 of ZED-F9P. If default is ok, simply go to u-center > Menu Bar > UBX-CFG-PRT > UART2 > Protocol out = NMEA”...

After following the various threads I have created the setup described below: https://thefarmingforum.co.uk/index.php?threads/kv-tellus-geospread.399578/post-9015482 It is successfully receiving and working on a tablet wired via usb, but I can’t make it work via the Rs232 port to the Tellus...