Recent content by willie8110

  1. W

    Massey Ferguson 8130

    More than likely that’s it.
  2. W

    Massey Ferguson 8130

    Ya free as a bird. I seen that qtp do a seal kit for them that’s what made think seals
  3. W

    Massey Ferguson 8130

    No not at all. Not a lot of 81s around here. A friend has one but she’s open center
  4. W

    Massey Ferguson 8130

    Would a valve seal kit sort the problem or is it a whole new valve block
  5. W

    Massey Ferguson 8130

    It is ya
  6. W

    Massey Ferguson 8130

    Only seen you message now sorry for not getting back to you. That make a lot of sense I’m having two problems with my 8110 the brakes going and the trailer brake is constantly pumping I took the valve out and checked it but couldn’t find anything wrong.
  7. W

    Massey Ferguson 8130

    Any pictures I was thinking it would be worth get a seal repair kit
  8. W

    Massey Ferguson 8130

    They were fine but hard compared to the new ones
  9. W

    Massey Ferguson 8130

    Well lads my 8110 I have to keep bleeding the brakes. I’d bleed them and they would keep for a few days and I’d have to bleed again. I got the bakes and o rings done thinking it might be the o rings but still no different I’m thinking that it’s probably the brake master cylinders. Could it be...
  10. W

    Massey Ferguson 8130

    Did you replace the bulbs for 4wd and hi low
  11. W

    Massey Ferguson 8130

    Sound il try that in the morning should I be looking at the seals in the master cylinders before I take the trumpets off? If discs were gone would the handbrake still work
  12. W

    Massey Ferguson 8130

    well lads just wondering how you bleed the brakes on 8110 were fine two days ago and a bit spongy yesterday and gone today. handbrake still works perfect
  13. W

    Massey Ferguson 8130

    worse case its the load sensing valve if it ends up stuck with filings its a small plus
  14. W

    Massey Ferguson 8130

    slightly better pictures
  15. W

    Massey Ferguson 8130

    Ya it seems fine but still I'd rather it be right in case it call other problems I'd hope it would be as simple as filings but time will tell. Whatever way is by passed the trailer brake valve doesn't work either
Top