Recent content by wurzel2190

I did think so checked. But can't see what plate does as rotor turns in other direction. Could rotor be turning in the wrong direction

I tried several but the best seemed to be the one I use for wheat. It is deep fluted

The sprinter and prunto have the metering units. I swapped the electric motors over this morning to check it wasn't motor.even with just about 10kgs of beans in hopper it blocks

Hi . I have spent the last two days trying to drill some beans with a Horsch prunto. Beans keep blocking metering wheel. Have fitted a plate for large seeds.any ideas or tricks to help

Looks like a great idea thanks

We use similar ones but front bolt always wears out and we end up loosing the wing. Any tips to prevent this

Hi . I have a new holland T7210 none of work lights will come on.have checked fuses all ok.anybody got any ideas

Could it be the ECU box inside the console

Hi.i have a 2004 new Holland Tm 155 power command.it has lost all the gears, PTO and hydraulics.the steering and spool valves are ok. There is a burnt smell coming from console by the controls .

No pipes are ok ,

If it was the turbo would it make the engine miss and be under powered ,

there is a slight pressure from dipstick but surely that normal.tractor is missing a bit , could it be an injector putting in to much diesel

Hi, we have a new Holland TM 155 2006 ,6500 hours. All of a sudden it has started blowing a lot of black smoke when under load and oil is coming out of filter in top of rocker cover.not sure if two things are related but started about same time. Any ideas greatly appreciated

Hi, we have a new Holland TM 155 2006 ,6500 hours. All of a sudden it has started blowing a lot of black smoke when under load and oil is coming out of filter in top of rocker cover.not sure if two things are related but started about same time. Any ideas greatly appreciated

Tractor is going fine , pulling really well.when cold half a turn and it starts .just a problem when hot.