Home made big bale spike

Scholsey · Jul 30, 2015

Been pricing up bale spike for hestons/quads/4x3. Allbut and strimech seem somewhere near but dont look to be getting much for your money! So the old man going to have a go at making one. 4 tines and bushes £160, JCB brackets £120 and he's got £100 worth of box but still playing round with designs. Anybody got good pictures of spikes he can use as a guide?

Do the brackets need to be cocked forward slightly like on most buckets and grabs etc? Cant see the advantage of being able to crowd further down with a bale spike?

Wants to be able to pick up 2hestons, 3 3x4's or 4quads ideally!

http://www.ebay.co.uk/itm/HEAVY-DUT...307?pt=LH_DefaultDomain_3&hash=item3cfe1ba8cb

This one looks a monster

nick... · Jul 30, 2015

I made one for a telehandler.8 ft wide with 4 tines on top frame.works well but if i made another id make bottom q fit further out to get more rollback if you see what i mean
Nick...

Woodcraft · Aug 2, 2015

Have made quite a few of the one in my profile picture <--
Been made to fit front loaders and telehandlers, have never angled the brackets though
3 tines across the bottom, grapple on the top with one ram on the back of it
picks up 2 or 3 hestons, 4 quads, up to 6 rounds on end (carefully)
can make one for you if needed, pm me if you want to know more

Strawgalore · Aug 2, 2015

I've since made them a bit taller , I never thought the old girl would lift 4 .
4 spikes I'd possibly space the bottom of the brackets out a little to improve the crowd when low down !

warksfarmer · Aug 3, 2015

Woodcraft said:
Have made quite a few of the one in my profile picture <--
Been made to fit front loaders and telehandlers, have never angled the brackets though
3 tines across the bottom, grapple on the top with one ram on the back of it
picks up 2 or 3 hestons, 4 quads, up to 6 rounds on end (carefully)
can make one for you if needed, pm me if you want to know more

Can't blow up your profile pic so can you add some to the thread as we are looking to handle 2-4 hesstons on a manitou .

snowhite · Aug 3, 2015

C.J · Aug 3, 2015

One thing I don't do is put the tines in the bottom box section.

Like Woodcraft I put them about a foot up so that the tines go into the centre of the bale and the bit below stops the bales tipping forward , when the back frame is vertical.

Woodcraft · Aug 6, 2015

C.J said:
put them about a foot up so that the tines go into the centre of the bale

It also helps it stand up when you take it off the loader!

Strawgalore · Aug 6, 2015

I'd not have spikes half way up for love nor money ! Spikes in the bottom then you can stick em were you want !!

Woodcraft · Aug 6, 2015

ours only has 20cm below the tines, but thats needed for the Bale Band It packs, with out the bottom bar it can push the middle row of bales through

roscoe erf · Aug 6, 2015

Scholsey said:
Been pricing up bale spike for hestons/quads/4x3. Allbut and strimech seem somewhere near but dont look to be getting much for your money! So the old man going to have a go at making one. 4 tines and bushes £160, JCB brackets £120 and he's got £100 worth of box but still playing round with designs. Anybody got good pictures of spikes he can use as a guide?

Do the brackets need to be cocked forward slightly like on most buckets and grabs etc? Cant see the advantage of being able to crowd further down with a bale spike?

Wants to be able to pick up 2hestons, 3 3x4's or 4quads ideally!

http://www.ebay.co.uk/itm/HEAVY-DUT...307?pt=LH_DefaultDomain_3&hash=item3cfe1ba8cb

This one looks a monster

are you stacking in a shed close to the roof i wouldn't want one as tall as the one you are looking at on ebay i made mine out of box 4 tines set in the bottom box and then far enough up to get the second bale will lift 4 quads

C.J · Aug 6, 2015

roscoe erf said:
are you stacking in a shed close to the roof i wouldn't want one as tall as the one you are looking at on ebay i made mine out of box 4 tines set in the bottom box and then far enough up to get the second bale will lift 4 quads

My spike is about 8 foot tall and I only load trailer 4 quads high ( 12.5/80/15.3 tyres)

Shed is only 15 foot so take first 4 in and put in place, then take 2 off the top (of the 4)and place in front of the other 2.I can then place 2 heaps of 4 on top of these ,so that the stack is 6 high.Trailer is cleared in 6 visits.

bovine · Aug 6, 2015

I'm amazed there aren't some rules or testing required if you make these things yourself. After-all it is lifting equipment and things could go badly wrong.

Woodcraft · Aug 6, 2015

They should be CE marked if sold, and LOLER tested from my understanding?

nick... · Aug 7, 2015

Is it only me who is pee'd of with regulations,as if im going to do and or make something that could hurt or damage something
Nick...

roscoe erf · Aug 7, 2015

nick... said:
Is it only me who is pee'd of with regulations,as if im going to do and or make something that could hurt or damage something
Nick...

no your not alone

jamesy · Aug 7, 2015

nick... said:
Is it only me who is pee'd of with regulations,as if im going to do and or make something that could hurt or damage something
Nick...

It is the world we live in now that is slowly but surely making it hard & expensive to run any small business. To many people make a living enforcing, inspecting for & making up ever more ridiculous regulations & rules which we are expected to live by.

Don't get me wrong, some are needed & I believe in doing things safely but common sense would now appear to be extinct in some sectors.

roscoe erf · Aug 7, 2015

bovine said:
I'm amazed there aren't some rules or testing required if you make these things yourself. After-all it is lifting equipment and things could go badly wrong.

after over 10 years of use what sort of testing do you think it should have

Nearly · Aug 7, 2015

nick... said:
Is it only me who is pee'd of with regulations,as if im going to do and or make something that could hurt or damage something
Nick...

I'm reminded of the H&S inspector who saw a tractor and rotavator drive into the farmyard and said the bottom half of that machine should be guarded.

Scholsey · Sep 11, 2015

ImageUploadedByThe Farming Forum1441976458.484861.jpg

ImageUploadedByThe Farming Forum1441976493.551768.jpg

First 2 straw lorrys unloaded with it, much better job than a grab!!

Home made big bale spike

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

0 %

Up to 25%

25-50%

50-75%

75-100%

100% I’ve had enough of farming!

Share this page