- Location
- Welshpool Powys
Be nice conversion there is a nice perkins L4 on eBay that would pop in
Hedgerow fordson
- Thread starter Timo@hattonfarms
- Start date
Timo@hattonfarms
Member
- Location
- Warwickshire
There was a Perkins p6 conversion kit on eBay last week, wasn't on for 24hours before it was gone......... The 6d should just look right I'm hopingBe nice conversion there is a nice perkins L4 on eBay that would pop in
Nearly
Member
- Location
- North of York
Keith Buckley sells the Perkins conversion kit, new castings.
Not cheap.
Not cheap.
Timo@hattonfarms
Member
- Location
- Warwickshire
6d is a better engine IMO
- Location
- Warwickshire
If I can find my Allan Condie books, you're welcome to borrow them
I think there were 3 different types of mudguard fitted from 45-52, if you are fitting a Perkins you'll want a narrow type one etc. You may even be able to date what you've got ?
I think there were 3 different types of mudguard fitted from 45-52, if you are fitting a Perkins you'll want a narrow type one etc. You may even be able to date what you've got ?
Timo@hattonfarms
Member
- Location
- Warwickshire
Sounds interesting, I've spoke to a chap who's breaking 4 that he's imported from Canada I'm hoping to get most bits from him
- Location
- Warwickshire
Just realised my typo, I meant narrow type grille, but it doesn't matter if you are using 6d
8100
Member
- Location
- South Cheshire
Must be a bit of smog about when the Gardners have fired up....lovely
FordsonFarming
Member
- Location
- suffolk
my Mercedes Fordson
and the two gardner E27N's
and the two gardner E27N's
FonterraFarmer
Member
- Location
- Waikato, New Zealand
Mercedes Fordson
, in the second picture on the left , is that one of those 2 cylinder Deere's?
Timo@hattonfarms
Member
- Location
- Warwickshire
Update, got a good set of wings tank and footplates of a chap in Somerset. Dads 35x project is coming on as soon as it's done the E27n will be in
4440
Member
- Location
- South Suffolk
I think if i remember it is out of a Claas combine.
Last edited:
4440
Member
- Location
- South Suffolk
They are getting harder to find, its not the best one, but its all there.
FordsonFarming
Member
- Location
- suffolk
It's a mercedes OM352 non turbo that came out of our Claas Dominator 80, 120hp@2800rpm.
the engine had only done 3200hrs before the combine rusted away so it was a good excuse at having a go at putting it into a major.
8100
Member
- Location
- South Cheshire
What was the difference between 35 & 35 x .Not the dreaded Ricardo engine was it .
multi power
Member
- Location
- pembrokeshire
First 35 had 23 c standard engine, four cylinders
Next was three cylinder 35 perkins 3 152, dif lock was then an option, live drive standard I think.
Then 35 X 3 152X engine, more power and stronger top cover. Most had diff lock. Think this was direct injection ?