Trimble 750 - "No Auto Controls - Vehicle in Reverse"

Steevo

Member
Location
Gloucestershire
Now I'm getting all kinds of errors!

ImageUploadedByThe Farming Forum1470670521.886456.jpg
ImageUploadedByThe Farming Forum1470670537.109476.jpg
ImageUploadedByThe Farming Forum1470670547.393575.jpg
 

Steevo

Member
Location
Gloucestershire
Unplug the ez pilot/steer and the box bolted to the floor and plug them in again.
I get that message occasionally with my ez pilot.
Not sure about the reverse one though, could be connected.


Thanks. I've tried unplugging the floor box, the steering motor and the small square coupler along from the screen. It then rights itself for 5mins or so, until halfway down the next run it kicks out again.
 

Steevo

Member
Location
Gloucestershire
What firmware have you upgraded from?
What firmware have you upgraded to?

Was 5.3.1 I think. Now on the latest 7.something. Much better being able to see the row numbers.



Turns out internal error #12 is a "known issue".

Turning the screen off for 12 hours fixed it temporarily in the end, but it sounds like it's the EZ-Pilot firmware that's kicking up a fuss and needs sorting.
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 80 42.3%
  • Up to 25%

    Votes: 66 34.9%
  • 25-50%

    Votes: 30 15.9%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,292
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top