Today at work
- Thread starter Penmoel
- Start date
davidroberts30
Member
- Location
- pembrokeshire
- Location
- North West
Back in the workshop today, 6920 in with low transmission pressure. Checked the axles and it's the usual culprit, r/h inner bearing on its way out.
Tip for removing tight bearing cups, quick run of weld round the inside (mig or stick) let it cool for a minute and it shrinks the cup and falls out [emoji106]. Works great as long as you don't want to reuse the bearing [emoji23].
Then cab over for the power quad out.
Tip for removing tight bearing cups, quick run of weld round the inside (mig or stick) let it cool for a minute and it shrinks the cup and falls out [emoji106]. Works great as long as you don't want to reuse the bearing [emoji23].
Then cab over for the power quad out.
Nearly
Member
- Location
- North of York
Killing the rape.
It's a bit leggy.
It's a bit leggy.
- Location
- south norfolk, uk
Did you get some rowcrops in the end?
Nearly
Member
- Location
- North of York
Yes but didn't fit them.
Been using 18.4's all season so not going to swap 6 wheels for 30 acres of rape.
Just sprayed barley too to rinse pod stick out of lines.
Bit of a problem round the back 
Frank's put it in the wrong way
Nice bull though
Wimmins work this morning, then took @farmer_kev his warm butties
Had a go at learning a new skill
No shortage of lapwings here
Got it chucked around in time to be back for the day (er, morning and night) job
Then a quick squizz round the heifers to discover yet more dog walkerist's handiwork If yer dog's too fat to get over the stile, don't bloody bring it
Managed a bodge, but luckily my phone died
Frank's put it in the wrong way
Nice bull though
Wimmins work this morning, then took @farmer_kev his warm butties
Had a go at learning a new skill
No shortage of lapwings here
Got it chucked around in time to be back for the day (er, morning and night
) jobThen a quick squizz round the heifers to discover yet more dog walkerist's handiwork
If yer dog's too fat to get over the stile, don't bloody bring it
Managed a bodge, but luckily my phone died
Last edited:
- Location
- Near Colchester
Harvest a bit steady in sunny Essex
APJ
Member
- Location
- West Midlands(Shropshire borders)
Is that exceptionally early for you?
Yes it is early for here, this is a very light field which lies perfectly south facing and will only be around 150 feet above the river Forth.
We have cut around the 20th of July in the past but doesn't happen very often, it has been a hellish catchy spell of weather this past month but with the odd really good day.
We have cut around the 20th of July in the past but doesn't happen very often, it has been a hellish catchy spell of weather this past month but with the odd really good day.
- Location
- SW Scotland
You've got all three bridges there.
Had a look at the new Queensferry Crossing when I was up at the Highland Show - impressive engineering.
Does it open soon?
CrevisbigX
Member
- Location
- Cheshire
Getnthair.
I was being flippant saying "a couple", as the new bridge is not finished yet I don't count it as being a landmark yet!!!
It is certainly a very impressive structure which totally dwarfs the road bridge, I don't know if it is just because it is new but during late evening when the sun catches it, it is incredibly bright.
It is meant to be opened to traffic on the Thursday 31st of August but then closed on the Sunday to allow 50 thousand people to walk over it.
The "lucky" people are to be picked by ballot from over 200 thousand people who applied for the chance to walk the bridge.
I was being flippant saying "a couple", as the new bridge is not finished yet I don't count it as being a landmark yet!!!
It is certainly a very impressive structure which totally dwarfs the road bridge, I don't know if it is just because it is new but during late evening when the sun catches it, it is incredibly bright.
It is meant to be opened to traffic on the Thursday 31st of August but then closed on the Sunday to allow 50 thousand people to walk over it.
The "lucky" people are to be picked by ballot from over 200 thousand people who applied for the chance to walk the bridge.
Hurdle bunter
Member
- Location
- shropshire
Now then, I've not been on here for abit,
think this lot is pretty much un-catch-uppable[emoji15]
Anyway, since I was here last I've done some of this
And this
Made this
Into that
Moved this
Dropped a bollock here
Bought this adapter off @smcapstick (many thanks, works a treat [emoji106])
Dicked about (lots)
Mostly accompanied by dave
Thankyou @llamedos for being patient with my technical issues, dunno what's altered but I can post pictures again[emoji4]
Anyway, since I was here last I've done some of this
And this
Made this
Into that
Moved this
Dropped a bollock here
Bought this adapter off @smcapstick (many thanks, works a treat [emoji106])
Dicked about (lots)
Mostly accompanied by dave
Thankyou @llamedos for being patient with my technical issues, dunno what's altered but I can post pictures again[emoji4]
smcapstick
Member
- Location
- Kirkby Lonsdale
Ah, I didn't know it was you!
