Need some help with problem on NH 7060 baler

pellow

Member
Location
Newquay
When the baler has made a bale and it tells the actuator to apply the net wrap, sometimes the box cuts out, if it does actually automatically apply the net the back light in the box will dim, I guess this is because there is not enough power and the actuator takes all the power cutting the box out. I have tried cleaning plugs and checking connections, can anyone help with a suggestion to try, thanks
 

wuddy

Member
Location
Scottish Borders
When the baler has made a bale and it tells the actuator to apply the net wrap, sometimes the box cuts out, if it does actually automatically apply the net the back light in the box will dim, I guess this is because there is not enough power and the actuator takes all the power cutting the box out. I have tried cleaning plugs and checking connections, can anyone help with a suggestion to try, thanks
Are you using the d plug in the cab for power, or a cable direct to battery?
 

IHA

Member
Location
Fife
I think it may be your tractor battery is either dry or about to go duff. It's amazing what power is needed to work the duck bill etc on these balers.
 

GreaseMonkey

Member
Location
Norfolk
I'll place money on the fact it's your fuse in the battery box. The flat fuse with the 2 bolt on terminal ends, it will have corroded inside and will let enough volts through but not amps. Seen it more times than I've had hot dinners!

Well, that's what it will be if you're running a New Holland tractor as well [emoji3]
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.2%
  • Up to 25%

    Votes: 65 34.8%
  • 25-50%

    Votes: 30 16.0%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,289
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top