dannewhouse
Member
- Location
- huddersfield
pair of dual wheels to fetch from kings lynn to Huddersfield, on pallet ready for loading any time in next month is fine.
tractor tyres kings lynn to huddersfield
- Thread starter dannewhouse
- Start date
Strawgalore
Member
- Location
- South Cumbria
How big are they?
dannewhouse
Member
- Location
- huddersfield
they are roughly 170cm diameter, 40 wide + duel so roughly 600?
they are stacked on top of each other on a pallet, so take up 170cm diameter on the lorry roughly 120cm height (2x600ish)
tractor back tyres.
could be stood up if you were short of space ie against headboard taking up 120cm length full width of lorry?
i will have to pay for 4 pallets if i ship them with a pallet type company
they are stacked on top of each other on a pallet, so take up 170cm diameter on the lorry roughly 120cm height (2x600ish)
tractor back tyres.
could be stood up if you were short of space ie against headboard taking up 120cm length full width of lorry?
i will have to pay for 4 pallets if i ship them with a pallet type company
Nearly
Member
- Location
- North of York
Get them fetched?
Where are they ,have man basket to go to selby can be done at same time
dannewhouse
Member
- Location
- huddersfield
probably work out cheaper to let a haulier or pallet firm fetch them.
£175 quote, 3hr+ drive so 6hr round trip + loading and stop for lunch!!! can I do it for the money?
just says kings lynn on the address.
is man basket as bad as these for being above standard pallet sizes.
1.2 x 1.0
as many as you want. my problem is I have to have 4 spaces.
man basket probably 1.2 x 2.4 so you would have to pay for 4 pallets as well.?
you are welcome to fetch them?
Last edited:
grainboy
Member
- Location
- Bedfordshire
Someone’s yanking your chain, that should be two pallet spaces.
dannewhouse
Member
- Location
- huddersfield
how do you get them on 2 spaces?
with them being duels I don't think they would stand up and be less than 1.2 (if you worked on 2x1m the other way) and obviously ok for 2.2? height.
standard pallets classed as 1.2 x 1m x 2.2 high?
suggestions for which pallet firm are welcomed?
grainboy
Member
- Location
- Bedfordshire
I use the Pallex network, sent a set of 20.8 x 42 Duals to Scotland the other week, two pallets,
dannewhouse
Member
- Location
- huddersfield
did you have to have them stood up?
grainboy
Member
- Location
- Bedfordshire
No, it’s compromise, ask them nicely.
spanners and hammers
Member
- Location
- cambridgeshire
palletline ,,, one pallet can be 5x4 feet