EGNOS satellite changed

Rookie

Member
Arable Farmer
Location
Lincs / Notts

Longpod

Member
Location
Northamptonshire
how do i open an img file?
or what do i do with it.
cant just put it on usb stick?

Copy it on to a blank usb stick. Not all usb sticks will work.

If your having trouble with your Trimble not recognising your stick, try a scanDisc or Lexar usb drive. It could also be the size of the usb it is not liking.
If you can find a usb under 4GB is may help.
 
Same here on future 136 fine back in the autumn campaign thinking fert not getting any connection

I have a Trimble 750 cfx and I can't get the egnos to work on it. Does it need an update to pick this up?
TIA

I heard from a few people that they had to upgrade to the latest version (V7.77 or higher) before it would work on an FM750.

That’s strange to me because I haven’t heard of it needing to be done on all units but worth a go.
 
There's a small planned outage for EGNOS coming up next week on 4th February and another the week after, that just got announced.

Each outage is only about 10 minutes long, and only one satellite at a time will be out, so hopefully wont affect too many people.

Screenshot 2019-01-29 at 16.35.59.png
 

v8willy

Member
Mixed Farmer
EZ 250 here, noticed it not working this past while but as it's not used over winter never paid much heed.

only seen this thread last week, so upated it a couple of days ago, didn't have PRN136 or FUTURE136 on the list so left it on automatic overnight & nothing, played about with it a bit more & left it again but still nothing.

Did a hard reset this morning & got a green light, for the first time in months, hope it stays that way.
 
EZ 250 here, noticed it not working this past while but as it's not used over winter never paid much heed.

only seen this thread last week, so upated it a couple of days ago, didn't have PRN136 or FUTURE136 on the list so left it on automatic overnight & nothing, played about with it a bit more & left it again but still nothing.

Did a hard reset this morning & got a green light, for the first time in months, hope it stays that way.
If it plays up, you may need a firmware update also as described above.
 
Just recently got my Leica unit to lock onto the new egnos satelite.
It required the assistance of several people
Firstly a helpful member on here who sent me a link and a contact.
Secondly a man in another country went above and beyond the call of duty to get the right " files " to me.
Thirdly a younger person than l who could make sense of it all and was able to transcribe the data into my unit.

There is a lot of helpful people out there amongst the clowns :D. Thank you all.
 
Just recently got my Leica unit to lock onto the new egnos satelite.
It required the assistance of several people
Firstly a helpful member on here who sent me a link and a contact.
Secondly a man in another country went above and beyond the call of duty to get the right " files " to me.
Thirdly a younger person than l who could make sense of it all and was able to transcribe the data into my unit.

There is a lot of helpful people out there amongst the clowns :D. Thank you all.
Was it a MojoMini by any chance?

Buried balls deep in the bowels of this thread (well on page 2 ;)) I described the process to update the SBAS config file etc for them.

I remember writing it up, but I had to search for it myself. It was only in September...(n)

https://thefarmingforum.co.uk/index.php?threads/egnos-satellite-changed.245976/page-2#post-5463050

Anyhow glad you found the right folks and got it sorted. Never lose your faith in humanity!
 
Yes it is a mojomini.
I read this thread right from the start including your posts but unfortunately could not get it working.
I was sent 4 different files before it finally managed to get sorted which only concluded on friday.
Perhaps l had an " Irish " version that only understood Gaelic or something :D. Anyhow it worked on friday , saturday and today so l am a happy camper.
 
Yes it is a mojomini.
I read this thread right from the start including your posts but unfortunately could not get it working.
I was sent 4 different files before it finally managed to get sorted which only concluded on friday.
Perhaps l had an " Irish " version that only understood Gaelic or something :D. Anyhow it worked on friday , saturday and today so l am a happy camper.
I’ve always found the “proper” support at Leica to be really good to be honest. It’s a shame they’ve kind of moved out of the agriculture market.
 
Yes it is a mojomini.
I read this thread right from the start including your posts but unfortunately could not get it working.
I was sent 4 different files before it finally managed to get sorted which only concluded on friday.
Perhaps l had an " Irish " version that only understood Gaelic or something :D. Anyhow it worked on friday , saturday and today so l am a happy camper.
Also to say. Chuck up the config or firmware files on here as it may help another Mojo camper too!
 

Kaupoi

Member
Location
Nivala, Finland
Anyone updated Outback S? Local Claas dealer has tried to update mine, but not yet succeeded. Any ideas?
Seems like there is no solution for outback s. Local claas tried updating with agrocoms instructions. Next step would be to send unit to agrocom but it doesn't mean that they're sure they can update it. And the costs...
Rtk guidance system costs today ~700€(excl.vat) so...
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 80 42.3%
  • Up to 25%

    Votes: 66 34.9%
  • 25-50%

    Votes: 30 15.9%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,293
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top