Netherfield
Member
- Location
- West Yorkshire
Three point turn perhaps
Three point turn perhaps
I would have thought to start sliding you have to be on some serious ground or turning too fast.Those balers, I was told by a man in the know that at least two NH balers in this region had accidents last year because on very very dry ground the balers tyres offered zero grip, driver turns a bit tight and they slide, bending both drawbars!
thanks Phil I will see how I get on just waiting for parts and the timeI’m guessing it’s got a creeper box if it’s only got the short shaft. You’ll need to tilt the cab over to gain access, the shaft shouldn’t actually be that bad to get out/in. There’s a elbow fitting on the front of the powerquad that has a plastic pipe attached, that will probably need to come out. Put the flywheel end of the shaft in first then the pq end should just about drop in.
Got to make use of every blade of grass this year
Gotta give you one for creativityverdiestran
Back in time, 80 years or so, you paid the council a fee to graze verges, and let a young lad sit with them all day... win win for the council, they got paid for trimming verges.
pre wreckers
Wood!What will he be loading out of the wood
& ropes or straps would only add more weight...Safe as houses that its got a fourtrax on front. You can see he didn't want to overload it didn't put a full third course on
But it looks like he got them in the boot anyway though!& ropes or straps would only add more weight...
pre wreckers
Deals been done
Half a load for a 4trakIt will be fine, I would be worried if it had a green tractor on the front.
pre wreckers
It will be fine, I would be worried if it had a green tractor on the front.
Pulled a few loads similar size on the ifor behind the defender. We did strap them though. 17 rounds I think we had on one load. Realised it was to many after 1 run.