grainboy
Member
- Location
- Bedfordshire
Today at work, or Loaded and trucking,
Overhang, what overhang,
Overhang, what overhang,
Today at work
- Thread starter Penmoel
- Start date
Eildon Hill
Member
Forever Fendt
Member
- Location
- Derbyshire
Bus mans holiday garage conversion to Dog grooming studio
Mums-son-Aaron
Member
Spent 3 days hauling Wheat from Romney marsh down to dover! Was a bit of a ball ache as the boat was late in then had issues with loading. But eventually we got there!
I hope Riverlea have filled in the potholes in the yard or with that weight you might be swimming!
- Location
- Worcestershire
Pit work, trailer monkey,
pharrow then bedforming sum's the week up
Not the best surface is it ?
It’s only a 600kg block,keep the nose down on tankers and trailers ?
- Location
- northumberland
Dunno ?
- Location
- Near Colchester
Getting ready for the next lot of small bale hauling with a new to me squeezer, just needed lights and checking over.
Should be able to haul them as fast as we can bale them now - some further away fields need baling when the annoying and useless rain showers stop.
I did get some fertilizer on some aftermaths this morning though, maybe not enough rain for that in the end - we did have a severe weather warning at the time.
and discovered an almost problem with the inverter welder plug. It has only been on there for 12 years.
Should be able to haul them as fast as we can bale them now - some further away fields need baling when the annoying and useless rain showers stop.
I did get some fertilizer on some aftermaths this morning though, maybe not enough rain for that in the end - we did have a severe weather warning at the time.
and discovered an almost problem with the inverter welder plug. It has only been on there for 12 years.
- Location
- southern riverina Australia
Making use of the rona cruise ships are they? Do you fill the life boats too
- Location
- NSW, Newstralya
Fuel usage planting with 12 metres & 300 hp
won’t do that with a plough & “combi”
won’t do that with a plough & “combi”
- Location
- NSW, Newstralya
You’d love my seed treating set up then. Treated 400 ha worth of wheat seed & 300 ha worth of chickpeas like this
Last edited:
- Location
- NSW, Newstralya
Don’t panic though, newer stuff has some safety features
- Location
- NSW, Newstralya
Still haven’t got the A/C fixed yet either . . .
- Location
- NSW, Newstralya
don’t know, but on a 300 hp engine while working, I think it would be very little, or even measurable . . .
It’s going to take the same amount of power to run the compressor whether it’s a 60 hp engine or 600 hp. Obviously the bigger the engine the less it is noticed
I have played around with the fuel consumption display in the past with the A/C. Just sitting at idle, showing l / hr, there is a slightly perceptible increase when turning A/C on, maybe 0.1 l / hr ?
When sitting at higher engine revs, or working in the field, you can’t notice any real difference in consumption, in either l / hr or l / ha
Fiveospades
Member
- Location
- Norfolk Broads
No worries, l think you and me could work together just fine. At least you have a keep out sign on the grain silo. A neighbour of mine used to dress his cereal seed in a cement mixer until he was no longer allowed to buy the seed dressing.You’d love my seed treating set up then. Treated 400 ha worth of wheat seed & 300 ha worth of chickpeas like this
View attachment 890555View attachment 890556View attachment 890557View attachment 890558View attachment 890559View attachment 890560View attachment 890561View attachment 890562View attachment 890563View attachment 890564
- Location
- NSW, Newstralya
This is what I was treating the chickie seed with, so it’s not exactly highly toxic anyway
