Zuidberg front pto leaking

dgjeynes

Member

• Jun 30, 2020

• #1

Have a leak on my pto pack just switched it on to find oil pouring out of the little hole to the left of this plug any help please

 

Attachments

• 
  2F9A1B8C-EC13-47F2-8062-5691A65C8375.jpeg

  278.2 KB · Views: 0

Tractortech

Member

Location

Cumbria

• Jun 30, 2020

• #2

Now Then..
Spanners and big circlip pliers need by the look of that..

 

dgjeynes

Member

• Jun 30, 2020

• #3

Any idea what I’m likely to find?

 

davidroberts30

Member

Location

pembrokeshire

• Jun 30, 2020

• #4

dgjeynes said:

Any idea what I’m likely to find?

Click to expand...

Oring gone?

Edit read properly?‍
Behind there is a suction screen

 

dgjeynes

Member

• Jun 30, 2020

• #5

davidroberts30 said:

Oring gone?

Edit read properly?‍
Behind there is a suction screen

Click to expand...

Removing that circlip did nothing. This is an old pto unit

 

N

NHMatt

Member

Location

West Sussex

• Jun 30, 2020

• #6

My GUESS is that the hole is a tell-tale, as seen on on classic car water pumps- it basically lets oil flow out when the pump seals are worn, so you know when the coolant pump is likely to fail. Lynx Engineering would know for sure- I usually speak to John Sandys.

 

Tractortech

Member

Location

Cumbria

• Jun 30, 2020

• #7

Did you pull the disc shaped bit out once the circlip was removed??

 

N

njneer

Member

• Jun 30, 2020

• #8

Sure there is a gauz or filter behind the disc.
Screw a bolt into the threaded part and slide hammer the disc out once the circlip is removed , clean the filter and fit new o ring to the disc.

 

dgjeynes

Member

• Jun 30, 2020

• #9

Couldn’t get it out will try the bolt into it

 

dgjeynes

Member

• Jul 1, 2020

• #10

So I pulled this plate off to find this little tube broken off the end of the shaft

 

Attachments

• 
  3A43E54F-E64E-44F8-A6EE-371281774943.jpeg

  520.1 KB · Views: 0

Tractortech

Member

Location

Cumbria

• Jul 1, 2020

• #11

Ohhhh dear,,,,, as we in the trade say..