- Location
- East yorks
Nice, how many Kw. Do u get some subsidy for them?
Today at work
- Thread starter Penmoel
- Start date
Nice, how many Kw. Do u get some subsidy for them?
Gerbert
Member
- Location
- Dutch biblebelt
About 10 kw. No subsidy. There are some tax thingies around it but they are no use to us.
Bossfarmer
Member
- Location
- between Perth and Inverness
how do you find your massey combine? i notice u can buy those cereas a lot cheaper than NH or claas
Chae1
Member
- Location
- Aberdeenshire
Is that a plane!?
You'd need two!
- Location
- Hereford
Caught the left one on a feed barrier turning too tight out of a shed . The right one was like it when tractor was acquired but never use right hand door .
Might need one if it doesn't dry up.
2wd 6610 with a 600l sprayer, only peasant farmers round here you know ?.
Dave6170
Member
- Location
- Watten, caithness
Generally in bits getting repaired ??
it’s not been great, really like the header, but that’s not cheap to keep. Header was gone through by the dealer 4 years ago, tomorrow it gets 20 bearings and 5 powerflow belts. I struggle to sort the crop, it will cut and thrash far more than the sieves will handle, but that maybe me being useless at setting it up as not been on the combine many years. Saying that though, I did ok setting up the Class ?Lots of niggles the last 3 years, 1 major breakdown.
we are trying to put 8-900 acres through it though and I do push it to it’s limits.
Would I buy again, yes, but only if I was cutting my patch, as I could get a combine and a dryer for the same money as a Class.
Money not an issue, I’d go back to Class.
I have been tempted to buy another, but haven’t seen 1 for sale lately ?
Last edited:
REStracTORATION
Member
- Location
- Near Colchester
Low volume irrigator had two punctures, a PITA .
Dman2
Member
- Location
- Durham, UK
Bit of Roundup on Barley
Must be getting close to making a start
Had a bit play with new phone
Has a thermal imaging camera on it
Might come in handy
Must be getting close to making a start
Had a bit play with new phone
Has a thermal imaging camera on it
Might come in handy
- Location
- Huntingdon
Be very handy for owners of lexion combines ??
- Location
- SW Scotland
Contractor turned up with this new toy.
I had said I was worried that that I might not get all the grass in the pit. - but we did.
It really does pack it in and left a very firm surface. We can usually cut up the silage as we run up and down with the forklift when putting the sheets on. Not this time - forklift was hardly leaving a mark on the surface.
Must, surely, lead to less sinkage and a better fermentation with less air in the pit?
I had said I was worried that that I might not get all the grass in the pit. - but we did.
It really does pack it in and left a very firm surface. We can usually cut up the silage as we run up and down with the forklift when putting the sheets on. Not this time - forklift was hardly leaving a mark on the surface.
Must, surely, lead to less sinkage and a better fermentation with less air in the pit?
Steevo
Member
- Location
- Gloucestershire
Tractor looks very tidy indeed!!!
- Location
- British Isles
how do the numbers stack up as we are looking at putting up a small one near the yard
Dave6170
Member
- Location
- Watten, caithness
They did it up. Looks good. They said mr parris was messaging them wanting to buy it
- Location
- Exeter, Devon
What phone is that?
- Location
- Exeter, Devon
Easily done.