- Location
- Moreton-in-Marsh, Glos
Definitely
Weaving GD user thread
- Thread starter Cutlerstom
- Start date
- Location
- Worcestershire
No
SorenIlsoe
Member
- Location
- Fjenneslev, Denmark
As long as there are no problems with the bearings and you remove the shims so the discs are running close, you have more hectares to go.
- Location
- Worcestershire
Now you have spares.
Yes, the bearing were all about gone to be fair so worth a change
- Location
- Worcestershire
Looks like you’ve the new hub I’m still on the old cast hubs (big disc) so can just change the bearings.
Ah ha.
That explains it.
I've got to get another box of bearings.
Only a couple left now.
They don't last that long, but last add up I was on 25p an acre for bearings.
ok thanks for that. What do you set your barrel at?? Is 200kg/ha enough
Depends on tgw, but yes should be enough.
Check your Coulter tubes haven't closed up at the ends, some of mine had.
Can't remember the barrel setting, but it needs to be quite wide to allow the beans to get in the flutes.
- Location
- Warwickshire
To much pressure on them??
- Location
- Warwickshire
The first two there was too much pressure on drill the last two have gone after we have had drill re set up by weaving
Will Blackburn
Member
- Location
- Cheshire
Damage already done?
Steevo
Member
- Location
- Gloucestershire
If anyone near Glos fancies planting wheat into 50-60ac ex-bean land as a contract job I’d be happy to hear some pricing. 24m tramlining and autosteer would be an advantage.
(sort to intrude on the tech stuff)
(sort to intrude on the tech stuff)