I suspect @Bald Rick is now in cahoots and has taken control of the points purse strings from @Chris F
Today at work
- Thread starter Penmoel
- Start date
I suspect @Bald Rick is now in cahoots and has taken control of the points purse strings from @Chris F
- Location
- Hereford
He probably thinks that all the points now go to him direct as as a result of making up to lofty towers of the Mods !
- Location
- Lancashire
Spent the last week in the salon, walked yhe hoggs home un afew late lambs
Then found some more
Then afew more
Gathered the last batch
Done for another year
Then found some more
Then afew more
Gathered the last batch
Done for another year
- Location
- Northumberland
Have you ever removed moist grain silos? Got a couple here to come down. One is approx 22m high.
Stw88
Member
- Location
- Northumberland
bit of shearing this morning then first outing of the year for the baler.
grainboy
Member
- Location
- Bedfordshire
Never taken down a moist grain silo.
- Location
- Exeter, Devon
Time for the boys to go back to work:
Be interesting to see if Heinz loses any weight over the next 3 weeks:
Be interesting to see if Heinz loses any weight over the next 3 weeks:
- Location
- Near Colchester
More fencing in the rain, 260 posts in so far.
Steevo
Member
- Location
- Gloucestershire
Hope you’ve been taking all the tips from Clarkson!!
P.S I’m pretty sure there will be more than 47 varieties of Heinz before long…!
- Location
- Exeter, Devon
The moment Clarkson was called out to reports of escaped sheep only to find they were safely where they should be rang very true with us.Hope you’ve been taking all the tips from Clarkson!!
P.S I’m pretty sure there will be more than 47 varieties of Heinz before long…!
Speedstar
Member
- Location
- Scottish Borders
If they are still good give Paul Hibert a call he buys them and takes them down
goldeneagle
Member
After soaking in WD40 for 2 days and getting 900 odd Nm of torque on it with impact gun (broke 6mm hex bit in half after twisting) had to take last resort to get capscrew out by drilling head off.
Hydraulic multi coupler body is aluminium alloy and capscrew was 8.8 and head was corroded solid into recess.
Old man wants to replace with stainless steel but a quick check on galvanic series suggests this is not a good idea.
Deerefarmer
Member
- Location
- USA
Thunderstorm going on to the north while the neighbors were finishing wheat today @ work
sticky
Member
- Location
- Near Stratford upon Avon
Topped 11 acres that the sheep came off at the weekend.
- Location
- Near Colchester
You need a new hammer handle urgently or a nasty accident could occur during vigorous banging something.
Will get it sorted
- Location
- Huntingdon
Im sure that hammer will have its own individual service protocol and inspection record
serf
Member
- Location
- warwickshire
Well that makes my attempt at the job look sh!t
