quick fixes, bodges and creations
- Thread starter jimmer
- Start date
Bit of reusing today... dug out of the brambles/that'll come in handy one day pile and welded to concreted in stub post. For a gate post/dirty water pit fence. Anyone know what it came from?
There's a few more bodges/creations in this pic as well if you can spot them.
There's a few more bodges/creations in this pic as well if you can spot them.
Kv plough beam
- Location
- West Yorkshire
Battery jump lead crocodile clip for earth clamp
Scholsey
Member
- Location
- Herefordshire
the float made out of the dried road kill badger you used to finish off that concreting?
Last edited:
- Location
- East Sussex
You sure it was road kill?
- Location
- South wales
The spirit level used to level that block work up 
Rod Dumbreck
Member
Post used to disguise the fact that the tractor has the engine and gearbox missing
Lol. As long as it does its job we don't worry too much what it looks like!The spirit level used to level that block work up
will soon cover imperfections. Wall was built on sloping concrete so naturally it follows the slope
Mouser
Member
- Location
- near Belfast
Kuhn mower drawbar?
- Location
- Boroughbridge, york
Is that a haybob trying to escape on home made plastic drum raft?
Vicon varispreader frame with drums and small submersible pump tied to it. Takes about a month pumping 24/7 (and many sprinkler moves) to empty pit.
- Location
- Cambs/Suffolk/Norfolk
Not all that recent but found on my phone camera thought I’d stick it in here. A bit of a cut and shut job repaired cheaply with off cuts!! Mostly pleased with the paint match as I mixed it myself with some John Deere green and New Holland yellow as it was all I had at the time 
michael N123
Member
Looks a proper job thatNot all that recent but found on my phone camera thought I’d stick it in here. A bit of a cut and shut job repaired cheaply with off cuts!! Mostly pleased with the paint match as I mixed it myself with some John Deere green and New Holland yellow as it was all I had at the time
View attachment 983157
View attachment 983159
Nearly
Member
- Location
- North of York
internal shed gates
stepped gates on the front
prototype swing back hinge (needs thicker wall steel and a cap on)
can walk cows past this now.
Welder decides a life of bodging is too much and commits Hari Kari under loadall wheel
I'm going to bed!
prototype swing back hinge (needs thicker wall steel and a cap on)
I'm going to bed!
- Location
- Cambs/Suffolk/Norfolk
The little parweld is looking sad! What happened?
Done that before, worked a treat.