- Location
- Limousin/Charentes toad land
My deutz has topcon autosteer which I have used all year without any real problem. Thinking back to early spring, flat rolling seing the diff lock, sometimes the tractor would start weaving. Not really important on that job.
Well, now I am drilling, by and large it is fine, but sometimes (normally in a damp bit if ground and the tractor is « bogging” a bit) the tractor starts weaving in across the line and never gets better itself, just worse and worse, so I get her under control, steering, and Re engage.
Is this just an issue of being too sensitive or not sensitive enough? Also, with this top con I don’t know how to adjust , with the green star this stuff is obvious
Tia
Well, now I am drilling, by and large it is fine, but sometimes (normally in a damp bit if ground and the tractor is « bogging” a bit) the tractor starts weaving in across the line and never gets better itself, just worse and worse, so I get her under control, steering, and Re engage.
Is this just an issue of being too sensitive or not sensitive enough? Also, with this top con I don’t know how to adjust , with the green star this stuff is obvious
Tia