Jd 3400

MushroomRob · Oct 20, 2021

Hi all,
In process of returning my 3400 to as new condition. Any one know who does parts at reasonable price or do I have to have my pants pulled down by main dealers?
need main boom pivot bushes , track rods truneon bearings etc

cheers in advance

ACEngineering · Oct 20, 2021

MushroomRob said:
Hi all,
In process of returning my 3400 to as new condition. Any one know who does parts at reasonable price or do I have to have my pants pulled down by main dealers?
need main boom pivot bushes , track rods truneon bearings etc

cheers in advance

If your mainland uk and want to look the part numbers up you want via JD parts site then send them to me I can message you back some prices of what my suppliers can do.

Chieftain · Oct 20, 2021

MushroomRob said:
Hi all,
In process of returning my 3400 to as new condition. Any one know who does parts at reasonable price or do I have to have my pants pulled down by main dealers?
need main boom pivot bushes , track rods truneon bearings etc

cheers in advance

I that an auto greasing unit fitted to the front?

Would be interested to know how much the bushings cost too, I'd imagine they're a fortune from JD themselves.

fendtfiasco · Oct 20, 2021

Assuming it was built by Matbro/Terex then if you are Northern Ireland Alexander Mills might be able to help. Although as they are back a bit in years some of the knowledge has been lost, i think Matbro Fred has retired..

Phil P · Oct 20, 2021

fendtfiasco said:
Assuming it was built by Matbro/Terex then if you are Northern Ireland Alexander Mills might be able to help. Although as they are back a bit in years some of the knowledge has been lost, i think Matbro Fred has retired..

3400 was JD’s own machine, unlike the earlier 4400 which was a green matbro.

MushroomRob · Oct 20, 2021

Chieftain said:
I that an auto greasing unit fitted to the front?

Would be interested to know how much the bushings cost too, I'd imagine they're a fortune from JD themselves.

Yep auto greaser - although needs some tlc , was on there when I bought . If I’m honest I prefer a standard grease nipple - you can see if the grease is going actually in and not just presuming!!!

MushroomRob · Oct 20, 2021

ACEngineering said:
If your mainland uk and want to look the part numbers up you want via JD parts site then send them to me I can message you back some prices of what my suppliers can do.

I will do ta .

Jd 3400

MushroomRob

Member

Attachments

ACEngineering

Member

Chieftain

Member

fendtfiasco

Member

Phil P

Member

MushroomRob

Member

MushroomRob

Member

SFI - What % were you taking out of production?

0 %

Up to 25%

25-50%

50-75%

75-100%

100% I’ve had enough of farming!

May Event: The most profitable farm diversification strategy 2024 - Mobile Data Centres

Share this page