I’ve had a mapped 155. They drive like crap to be fair. Zero bottom end and all revvy at the top. Gone back to a standard 155 now
New jd 6r
- Thread starter Norfolk Olly
- Start date
I’ve had a mapped 155. They drive like crap to be fair. Zero bottom end and all revvy at the top. Gone back to a standard 155 now
Lakesdigger
Member
There's remaps and remaps though. There's many many people out there can plug a laptop in and stick a generic map on. If you want a proper map tractor needs to be on dyno
- Location
- Pinnaroo. South Australia
Command pro isn’t old but the armrest has been around in current form since late 2013. It’s not a particularly well set out setup either as I find I accidentally switch things on I don’t want to.
Hooch
Member
- Location
- cambridgeshire
Why did JD not build the dome in the roof as they have on the 7 and 8 .I suppose they earn too much from all the thefts 
It’s because the 6 are built in Germany and they hate the Americans so they don’t copy there ideas.Why did JD not build the dome in the roof as they have on the 7 and 8 .I suppose they earn too much from all the thefts
Ducati899
Member
- Location
- north dorset
Got a quote for a Deere 6430 premium12 years ago
Cattle were £2.40/kg (ish) liveweight, 12 month stores
Today a Deere 6130r is more than double the price of the 6430
Store cattle are........ Still £2.40/kg (ish) liveweight
Does nobody else see a problem here??!!!
Cattle were £2.40/kg (ish) liveweight, 12 month stores
Today a Deere 6130r is more than double the price of the 6430
Store cattle are........ Still £2.40/kg (ish) liveweight
Does nobody else see a problem here??!!!
- Location
- Co antrim
As its a status symbol, ive got a yellow thing on my roof and the neighbour doesnt
Yeah, you bought a fecking deutz instead of the 6430!
lloyd
Member
- Location
- Herefordshire
Yeah finish them and sell them deadweight.
Deadweight price is 50% higher than 12 years ago .
Chae1
Member
- Location
- Aberdeenshire
Aye, dodged a bullet there right enough
Think of the repair and diesel bills that I'd already have had with the Deere
As someone who was very high up in the agriculture department at the EU said to me a couple of years ago we were getting payed too much back then.
I hope you used remarkably high force to squarely kick them between the legs?
Fragonard
Member
Are you happy with your Deutz performanceAye, dodged a bullet there right enough
Think of the repair and diesel bills that I'd already have had with the Deere
It was at a dinner on a course run by Welsh Government so a kick in the nuts wouldn't have gone down well. But I did tell him he was a idiot and the detachment between the Civil service and reality so concerning.
Timbo
Member
- Location
- Gods County
Very poor remap or likely a tuning box then, because that is NOT how they perform with a proper remap...
Happy with the wee k430 profiline that I bought with all the bells and whistles?
Aye, it's been a good one to own, and even better to operate.....
I might even in the past have made the odd wee hint now and again to say so ?
Not paid as much as that self serving imbecile was though.
- Location
- Larne, Northern Ireland
Were you not happy with the 6150.4?Happy with the wee k430 profiline that I bought with all the bells and whistles?
Aye, it's been a good one to own, and even better to operate.....
I might even in the past have made the odd wee hint now and again to say so ?