glasshouse
Member
- Location
- lothians
£500?Luckily a full rebuild is relatively cheap.
£500?Luckily a full rebuild is relatively cheap.
7k€, way cheaper than anything Deere or Fendt.£500?
In iteland ?7k€, way cheaper than anything Deere or Fendt.
Hope mine does longer than that! Just done over 5k hours.Dream on
7000 hrs is about how long they last, abuse doesnt come into it
Better than £20k for power command rebuild7k€, way cheaper than anything Deere or Fendt.
Depends how long you have run it for with error codes etc on. Some people keep going and melt packs together.Better than £20k for power command rebuild
Wasnt error codesDepends how long you have run it for with error codes etc on. Some people keep going and melt packs together.
Ours was 6k and they did high, low and medium clutch packs. Done by CNH dealer.
Theres a company in france that does a recon fendt vario exchange for 4000 euros. Plus haulage to and from thier place and an inde mechanic to remove it and refit the new 1 still wouldnt be any more expensive, possibly work out cheaper as haulage wont be that bad seein its only a pallet size delivery7k€, way cheaper than anything Deere or Fendt.
This one was a loooong way short of those sorta hours.Dream on
7000 hrs is about how long they last, abuse doesnt come into it
How manyThis one was a loooong way short of those sorta hours.
4500How many
But couldnt take that much money to replace the clutch plates4500
turned trans oil black and blocked filters within 10 hrs of been replaced. Clutch packs were shot I was told.
How do you abuse an auto command tranny?4500
turned trans oil black and blocked filters within 10 hrs of been replaced. Clutch packs were shot I was told.
Back end full of filings it was a messBut couldnt take that much money to replace the clutch plates
I wouldn’t but something had certinly been done to this oneHow do you abuse an auto command tranny?
Made by JLGWe have a Deutz telehandler, most reliable bit of kit we have ever owned, always starts on the key, other than a couple of new hydraulic pipes and battery and services nothing else spent on it in 9000hoours.
Lots of imports come into the states. Most are good... some are not. Local chap bought himself a t7210 two years ago that hailed from her Majesties kingdom. Has spent about half it's time in a workshop torn to bits. Mechanic doing the work said he followed a wrench trail all the way to the heart of the transmission first time he opened it up.I would love to know how the new owners get on
abroad .
Why do they import tractors?Lots of imports come into the states. Most are good... some are not. Local chap bought himself a t7210 two years ago that hailed from her Majesties kingdom. Has spent about half it's time in a workshop torn to bits. Mechanic doing the work said he followed a wrench trail all the way to the heart of the transmission first time he opened it up.
Great way to purchase a fully specced used tractor for a decent price.Why do they import tractors?