Dman2
Member
- Location
- Durham, UK
New toy day
- Thread starter Gedd
- Start date
- Location
- South Wales UK
No then
Left hand drive too. Must be a sod trying to see past the slower plane in front to overtakeOne small criticism, the gearstick in front of the seat could have been a bit longer!
- Location
- South Wales UK
I though you had to have retractable under carriage to be expensive?
- Location
- Exeter, Devon
And surely the fan on the front should be guarded?One small criticism, the gearstick in front of the seat could have been a bit longer!
Mark C
Member
- Location
- Bedfordshire
its the detachable ones that are rated less and have a bad reputation for falling off
- Location
- Wormingford, Essex
Jdunn55
Member
- Location
- Helston, cornwall
Dman2
Member
- Location
- Durham, UK
thats the throttle, strange place but worksOne small criticism, the gearstick in front of the seat could have been a bit longer!
Dman2
Member
- Location
- Durham, UK
Yeh that fans only there to keep me cool
Wouldn`t believe how much you sweat when it stops
Aspiring Peasants
Member
- Location
- North Pennines
Just wondering how you're getting on with the mower because I got the same one. Cut some new seeds Ok but couldn't get it to cut some thick old PP. Spent ages messing around with settings. Eventually just had to keep going as I needed the field cut. It looks awful and of course is a road side field.
Had a bad nights sleep then went out in the morning and messed around with all the settings etc. Finally had a look at the blades, it had come with them the wrong way round
- Location
- Sweden
Not new beacuse i get it when silage start in may, but now is time for the first service after silage and hay are in. The model is 7S 180
- Location
- Minehead,Somerset
ollie989898
Member
Come on, give us a go.
- Location
- Minehead,Somerset
Attachments
ollie989898
Member
Can I ask, why this was chosen over a Holmer or Xerion?
Because it was the nicest colour!
- Location
- Minehead,Somerset
Replaced a 66 Reg Holmer.
This is a new model ,only second one in this country and no 5 off production line.
Going well, its 2 months old . Only issue is software issue with different makes of kit not talking 100 % to each other . It's meant to auto switch on/ off on headlands so that 5 m from beginning, pump starts so slurry comes out as you pass headland run or virtual line set and at other end , valve closes 5m from headland so as you lift or pass headland/ virtual line set , no slurry comes out but that's not working .
By the way , it's not mine !! Nearest AD plant .
This is a new model ,only second one in this country and no 5 off production line.
Going well, its 2 months old . Only issue is software issue with different makes of kit not talking 100 % to each other . It's meant to auto switch on/ off on headlands so that 5 m from beginning, pump starts so slurry comes out as you pass headland run or virtual line set and at other end , valve closes 5m from headland so as you lift or pass headland/ virtual line set , no slurry comes out but that's not working .
By the way , it's not mine !! Nearest AD plant .
ColinV6
Member
Wow, the 6 and 7S models really do look great. So much nicer than the big ugly 8S.
Those tyres are HUGE what sizes front and back?