What headstock is this?

Afternoon,

I dont spose anyone could help to identify this headstock and the loader brackets to suit I need to fit to some new attachments. Sorry bit of a novice with this stuff but im learning.

The eyes on the bucket are 38mm and its 330mm from centre of eye/pin to bottom of the hook/bracket

Trima seems close but the top of the headstock is square most of the loader brackets I see seem to be rounded.

Its an old Case loader, the plate says model O90? fitted on a Case 1494
 

Attachments

  • 20220725_135250(2).jpg
    20220725_135250(2).jpg
    739.4 KB · Views: 0
  • 20220725_135704(1).jpg
    20220725_135704(1).jpg
    657.6 KB · Views: 0

jf850

Member
Location
Co laois
Afternoon,

I dont spose anyone could help to identify this headstock and the loader brackets to suit I need to fit to some new attachments. Sorry bit of a novice with this stuff but im learning.

The eyes on the bucket are 38mm and its 330mm from centre of eye/pin to bottom of the hook/bracket

Trima seems close but the top of the headstock is square most of the loader brackets I see seem to be rounded.

Its an old Case loader, the plate says model O90? fitted on a Case 1494

Put a tine in it , and use it as a bale spike , or sell it as a bale spike .
Buy one of the generic Euro headstocks.
Brackets for implements are cheap , very readily available . And easy to beg or borrow implements from other people .
 
If you have a good welder /fabricator locally , he might be a le to convert that to euro , but chances are that he will charge more than the one size fits all .
Your own one looks a strong well built thing .
Luckily he is my neighbour and was round today teaching me how to change a tractor tyre, says he can make it work so I reckons im learning some welding next week, when the euro brackets turn up. Todays bill was 3 cups of tea and some spring onions hopefully were in the same kinda currency for the welding!
 
I think from memory a 1494 is/was a David Brown tractor painted red and sold by Case after the takeover. Just in case you're looking for other bits anytime.
Yes finding parts listed under david brown and case ih but no shortage. Its definetly red not sure which red we'll order yet, I prefer gloss red she prefers power red, as long as it gets some paint I'll be happy.
 

Mur Huwcun

Member
Livestock Farmer
Location
North West Wales
If you say they’re very close to Trima then just chop the box section off and swap it for heavy wall tube set at the right distance, job done. Plenty S/H Trima implements about
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 78 42.9%
  • Up to 25%

    Votes: 63 34.6%
  • 25-50%

    Votes: 30 16.5%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 5 2.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,286
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top