Search results

  1. T

    Massey Ferguson 25 MF25 telehandler

    That would be brilliant if you could, I only need the parts section really if you have that bit.
  2. T

    Massey Ferguson 25 MF25 telehandler

    Hi I know this is probably a bit of a long shot be we have a Massey 25 telehandler that we use down at the silage clamps and the exhaust silencer rusted away. I can’t seem to find anything similar to replace it and was wondering if anyone knew what they were off or were they made specially for them.
  3. T

    Agco/Topcon agi 4 receiver for sale

    Ohright I will have a look for them. Egnos to medium accuracy would be fine, it’s only for cultivating, mowing etc but its what ever I can find really.
  4. T

    Agco/Topcon agi 4 receiver for sale

    We have recently bought a Massey Tractor which the previous owner ran topcon gps on it. All the wiring, valves etc are still on the tractor they just kept the receiver. so I was wondering if anyone knew of any agco/topcon agi 4 receivers for sale. Iv found a few ones off fendts but they won’t...
  5. T

    MF 7620 Vario engine re map good or bad idea.

    It’s D172049
  6. T

    MF 7620 Vario engine re map good or bad idea.

    There are two more in the range above ours with the same engine and chassis, so it all just depends on the bits inside. I know in the ideal world I should just buy a bigger tractor but that’s not an option especially with how farming has been this year. I what I want to up it by is no more than...
  7. T

    MF 7620 Vario engine re map good or bad idea.

    We have got a Massey Ferguson 7620 with a vario transmission, we are considering getting it remap as we are just short of a few hp when towing the drill (non pto drill). I’m wondering if anyone has done it before and if they gained more power or does the transmission just give up under the same...
  8. T

    Case / new Holland big square baler control box problem

    We have changed the tractor we run our case lb423 square baler on to one that has not got iso bus on, so we have had to use the proper case control box. It has always beeped every time it ties knot when we have run it on iso bus, but since we’ve had it running on the correct control box it come...
  9. T

    Sheepdog pups

    We are definitely interested in the tri coloured pup if she’s still available? when would it suit you to come to and have a look?
  10. T

    Sheepdog pups

    Both really, we’ve got about 100 ewes so we going to train her to work the sheep, go round on the gator every day etc
  11. T

    Sheepdog pups

    Oh brilliant, have you you got any tri colours left? We are just east of Shrewsbury up the a5 where about in west wales are you?
  12. T

    Sheepdog pups

    Hi do you have any pups left for sale or are they all sold? thanks Tom
  13. T

    Lupin whole crop mix seed

    Looking for a lupin whole crop mix for 5ha wondering what was available and price? Or something similar
  14. T

    Lupin and triticale whole crop

    I will apologise in advance because this has probably been discussed on here before I just can’t seem to find it. I was wondering if anyone has grown a Lupin and triticale mix before for whole crop and what there experience were with it and feeding it too fattening cattle. On paper it should...
  15. T

    Tips on how to use a Mzuri in the wet

    Hi, its my second year in strip till and could the two years get any different!! We’ve got a Mzuri pro till and I was wondering if anyone had any tips or experience of how to use them in wet conditions. I am trying to drill into osr stubble and I am struggle to make ours make a reasonable seed...
  16. T

    Opico dryer thoughts

    Yes I can see what you mean, I’m don’t know if you would know but do they use much gas? Also they say you have to change a screen to dry rape, do you know what that involves?
  17. T

    Opico dryer thoughts

    Hi We are looking at changing from our old batch drying system to an Opico mobile dryer and we have found one local that reasonably priced. I don’t know much about gas dryers because our old one is diesel, and the thought of gas has always put me off because you can’t just go to the red diesel...
  18. T

    Sumo Strake Review??

    I was wondering if anyone else have had any more experience of these rakes. We have gone to strip till this year and we had originally planned to using our older version of the Claydon TerraStar to work a small tilth to chit but what we have found is that on the headlands where the baler hasn’t...
  19. T

    Round baler: Kuhn - Vb2190

    Ohright ok. It’s got a 2.2m pick up which is plenty wide enough, Iv baled behind a 35ft lexion 780 with a good crop of wheat straw and it handled it easily 8-9kph. We are just by junction 12 of the m6 in between Wolverhampton and Stafford. Give me a call 07784554065 i can tell you all about it...
  20. T

    Round baler: Kuhn - Vb2190

    Yes it still for sale.

Forum statistics

Threads
188,807
Messages
4,305,177
Members
47,315
Latest member
nusa konjac
Top