Search results

  1. G

    Kuhn i bio

  2. G

    Kuhn i bio

    Dag Viking mine was connected properly with a load sensing line, free flow return as the port is there just to put a coupler in it and oil feed from the pump. I also had mine switch off the PTO. I suppose your TS115 can be plumbed likewise. I assume your constantly pumping oil to the Baler hence...
  3. G

    Welger vs McHale

    Wellytrack what about the old axiom that “he who pays the piper calls the tune”? I’d take his money and make them like pancakes if he wants!
  4. G

    Welger vs McHale

    It’s funny but I never have a customer ask or worry about density or weight. They want it baled dry and wrapped and if there’s a few more bales than last year it’s a bonus. Less and they think they will be short of fodder. I should say I only bale silage. Oh as an aside, Using my new fusion with...
  5. G

    John Deere 6145r v fendt 516

    I have a 6145r and a 55r and they are identical in every way except software. Sputnik, I got a good deal to change as dealership we’re looking to sell a few extra units. I think weight wise with 900kg weights they are circa 9 tons.
  6. G

    Welger vs McHale

    Yes Happy but Nokia struggled and divested itself of the phone business years ago only to return later. What are u suggesting about Welger?
  7. G

    Welger vs McHale

    Yes SId, u, on mature recollection have figured it out re Apple, Fendt, McHale. Now when u gonna fire the operator and have happy days baleing. Not trying to antagonise you but U blamed the Baler but then u admit “how would you know if it was the machine or the operator“?? Davydiesel I do...
  8. G

    John Deere 6145r v fendt 516

    Laoisfarmer I went through that exercise in Jan 2019. 516 profiplus with weighcell loader, FL, Front PTO, guidance autosteere etc. Basically fully loaded tractor but ended up with JD6145 with all the same features but 6cyl. A few things I hated about Fendt swung it for me but they were minor...
  9. G

    This is the future

    I kinda agree with lowland1. I farm (if u can call it that) because I enjoy the outdoors, dealing with animals, machinery and been my own boss. I would not spend a minute at it if I did not enjoy it. Life’s to short to wish it away. There comes a time in your life where it’s about been content...
  10. G

    Starting my own contracting business

    Have thought of counselling? ?
  11. G

    Need a small tractor - suggestion (England)

    So does that mean we won’t have nice pics in the new toys thread of a shiny new Fendt and flashing beacons. Life sucks man!!?
  12. G

    Deutz-Fahr mp130 error 05

    That is a Bio control unit showing the power up screen. On a bio that screen appears for a max of 6 seconds before it times out and the screen will now show the same screen but with an X in the link between the monitor and the Baler ECU if the correct communication are not established. Otherwise...
  13. G

    Deutz-Fahr mp130 error 05

    Boohoo that is the box of a Taarup bio!
  14. G

    Need a small tractor - suggestion (England)

    Well I suppose a Fendt wouldn’t be a bad place to start....with twin flashing beacons. Just kidding but I suppose it depends on do you intend to use it for agricultural purposes the likes of topping, ploughing, seeding spraying etc.? if so then a tractor that has the necessary Weight, lift...
  15. G

    Kuhn i bio

    Tks Hally, cold wet wintery day here after 7 weeks of great weather so I thought I’d sweep up and tidy things. Collected my new Conor Muck spreader and dropped of my old Abbey at the dealership so I made myself busy.
  16. G

    Kuhn i bio

    Just sweeping out the machinery shed and under the dust this is my Kuhn IBio. Fully Isobus compliant in that either of my JDs can use it via tractor control screen so no need for Baler monitor in the cab. Worked on the MFs I had too.
  17. G

    Kuhn i bio

    Mummy would never allow me pull a Fusion with an antique tractor!??
  18. G

    Kuhn i bio

    Hally, I’m happy I don’t have to work for u.? I wouldn’t risk my life with a 4cyl tractor on a wet hill holding back a Fusion while wrapping and picking! If u can put 6cyl 200hp in front of it do. The first 120/30 hop are expensive but 2 more cylinders and another 50/80hp are cheap. Only my...
  19. G

    Kuhn i bio

    Chips, McHales do have film binding. But there is no point comparing a Bio to a Fusion. They are worlds apart from a user and mechanical perspective except on Price! Furthermore the tractor to pull a Fusion will be a lot heavier than is needed for a Bio. The wrapping is a small delay but the...
  20. G

    Kuhn i bio

    Hally I think they need to be 30k less. If I were a mechanical engineer I would love to install a McHale Baler chamber on a Bio chassis and a McHale wrapper ring, plastic dispensers with cut and hold on it and then perhaps you would have a tough machine for heavy crops and rough ground. Now why...

Forum statistics

Threads
188,990
Messages
4,309,070
Members
47,340
Latest member
Elb
Top