Search results

check all the earths, there's a bunch under the dash panels i think and there's a big earth wire on the side of the cab behind panel to the chassis.

I know of one of them or one similar, was used for many years on corn drier. Not sure if it's still used or not. Not as tidy as that one though😂

i just see these one way inline valves a cover up for the actual problem, there not needed unless there's a fault with something else 🤷‍♂️

The skid unit manitou used was an industrial version, i once had some one manage to shear the front half shaft off! (would be rear half shaft if on a tractor) new from manitou was £1kish, i took it to a guy that broke IH tractors and expected to get a second hand one but when we looked at them...

It's got side shift on headstock too!

Yes there was 4wd option on the IH engined ones. Think that's an IH engined on in op post.

i sell a 4.2kw one

no brainer then for a bedding machine (y)

yes if your bedding with it then i would say the hydro will be best IF you can set the forward speed independent of the engine RPM like you can on the V plus.

Yes there is a decent starter for it if your in UK i can supply you. BUT what other hi torque starters have you fitted cause high torque and fast starters are basically the same thing.

its the H bit that don't make sense but that is clearly a H! there are several other 4RM25's with different letters but not a H.

It should be a 4 RM 25 H but nothing to be found on model or serial no 🤷‍♂️ Its out of the arc IMO

Fairly sure the powershift isnt an option on the 630, so limited your choice to 4 speed manual or the hydro. The hydro isnt quite going to drive like the V plus 140 models though but its probably better than the old 4speed box imo? The hydro/vario does not use the 90deg transfer box so imo...

It's a manitou not a jcb😂

Vap do some in a box, i have there ratchet screw driver cause i'm too tight to pay snap on prices, crazy expensive now.

Hands down this is my best screw driver😂

They have no liners in a 1100 series engine from factory, some people have bored and sleeved them if worn out but liner will be very thin and not go in to the water way. Liners cant really move UP anyway as the head is pressing them down! but some types do have seals at the bottom BUT NOT...

The box is okay but the tray is rubbish really. in binned the trays and kept the box for some odd random stainless bolts and washers i got. screwed drivers went in the tool box.

I bought this set a few months ago. Dont use them much but look nice :ROFLMAO: https://www.powertoolmate.co.uk/Products/0040000900030007/EB%252FMIL4932472003 It is missing/lacking a stubby PZ and PH though :X3:

Would expect at least 12months, get 2 years with milwaukee on batteries