Search results

You could use powerline adapters without needed line of sight. Plug one in with router and plug through one at socket where camera is powered. Cost about £30 no skills needed.

Hi not sure from your post what sort of electric fencer unit you want but I'd go for as big as possible. If your hedge grows well there will always be bits touching the fence so enough power to burn them off will keep fence from earthing. Single strand tensile wire with tensioner wheels is by...

Is the piston/ compensator inside it gone? Thomas Scott seating would be best bet

Tub feeder with some weight like silage in it will chop up veg no bother. Decent blades and side restraints pushed in.

Soft hands on the loader tractor is the job for filling silage bales into tub feeder. Gives more height and reach, no need to tip over to release and can put in half bale at a time.

Don't say you're planning to use a man cage! Hard frost will definitely help reduce markings as would worn tyres.

Need a good frosty morning before I'd be taking manitou on the lawn! Would depend on how much and high you are lifting it.

Looks like he could do with downsizing.

No border in the Irish Sea according to Bojo

Load my 10 cube siloking no bother with tractor loader. Chops straw bales, silage bales no bother. Always leaves a fluffy mix

I thought it was a bit late for that. Would be easier keeping rams elsewhere.

Estrumate.

Theres a nice jd2650 on done deal would do a job.

Vital tax ,👍👍

Unless you swap implements with the matbro a lot i wouldn't bother. Problems would include extra length, weight, more moving points, insurance and the matbro attachments being too big to start with. Ok for a bale spike or something. I can put my euro attachments on manitou with an adapter but...

Quiet wean nose flaps. Job done

The big massey contractor teams will buy to keep up to date. Always amazed at how much technology is needed for a slurry tanker or dodo pump.

Amazing what lego models are available. I wasn't needed this yr but it's all together.

I would mix at points 5 and 7 only. 1 2 10 11 are outside and you're going to need to remove feeding barriers or make doors. Slatted safety gang slats are a dirty job especially if you may use slat rubber in future. Ideally a tank with extra length and pump and tractor outside is safest and...

55k