Search results

  1. A

    Mf 4355 error code

    Ive got error/flash code 72 showing on 4355 power shuttle tractor drives fine hopefully someone has a list of codes thanks
  2. A

    Mcconnel pa93

    Im looking for a pa93 hedge cutter or similar machine of any make
  3. A

    Manitou mlt 634 120 wont start

    I have a 2008 634 120hp perkins 1104 common rail was running on tickover then cut out all fuses ok battery ok have retrieved the following flash error codes from machine 551. 439. 162 machine turns over but wont fire no fuel being supplied to rail Tia for any help
  4. A

    Loader to fit Renault celtis

    loader to fit Renault celtis any make considered
  5. A

    Mf 5455 calibration

    anyone know the procedure for transmission/shuttle calibration for a 05 speed shift 5455 thanks
  6. A

    case mxm gearbox calibration

    Does anyone have the gearbox calibration procedure thanks
  7. A

    JCB 320s air con

    Would anyone know the air con gas quantity for a 320s to refill system after leak thanks
  8. A

    Mf 6465 won't start

    I have a 05 tier 2 Mf 6465 and won't start turns over ok but no power coming to the dynamite stick and only 6v at the engine diagnostic plug wondering if anyone has a wiring diagram or any experience of these thanks
  9. A

    Perkins 1104

    I have a Perkins engine in a Mf only 2400 hrs and serviced every 300hrs and has recently started dripping oil out through breather hose no problem starting etc tractor does mostly loader work through winter just looking for people's view as the oil from breather seems excessive
  10. A

    Case 1840 hydrostatic pump

    i have a case 1840 skidsteer and found hydrostatic pump to be worn it is a danfoss pump any recomendations for parts supplier or a breaker whith a used pump case ce not much help but American dealers list all the parts for it does anyone have experience In buying direct from American dealers? thanks
  11. A

    Honda trx 420 2012 electrics

    I have a 420 and as soon as the key is turned it blows the 10 amp ignition fuse wiring seems good hasn't rubbed anywhere if I unplug the grey connector from the ecm fuse doesn't blow and dash lights up so I suspect a faulty ecm just checking before I order one has anyone come across something...
  12. A

    Mf 390 cab filter roof hatch

    any recommendations where to get cab filter hatch or is it main stealer only thanks
  13. A

    Fad axle parts

    Need a six stud hub/drum for fad axle normal supplier hasn't got any stock any recomendations for a supplier thanks
  14. A

    Locking fuel cap

    Friend of mine has had something put into his fuel tanks of his tractors I have found a locking cap for his ts put cannot find one for his ford 5030 has anyone got any recommendations for a supplier thanks
  15. A

    Adr tanker axle

    Wheel bearing has collapsed on a tanker drum damaged parts are expensive thinking complete axle is better in long run where is cage cheapest place to get one thanks
  16. A

    Nh tl100a

    Have a leak on the bottom 3pt link arm out of the of the transmission has anyone changed this seal what is involved thanks
  17. A

    lime spreader

    Looking at buying a lime spreader and have been offered an older bredal machine with PTO drive spreader discs seen most newer machines are hydraulic driven what are the benefits of this machine would only be used on lime no fert thanks
  18. A

    hydraulic hose/crimper

    Looking at buying a hose crimper have looked at gates which is good quality but a big investment for crimper plus hose and fittings are expensive did speak to apex fluid power at a local show they had a Finn power crimper at a good price plus hose and fittings were much cheaper just wondering...
  19. A

    Others: DR - gates mc1001 hose crimper

    Others: DR - gates mc1001 hose crimper Category: Others Manufacturer: DR Price: £550 Condition: Used Description: Used gates hyd hose crimper with 3/8 dies only for sale due to upgrade to air operated machine [SIZE=2]This post was automatically created via...
  20. A

    lime spreader

    Hi looking for a lime spreader transpread 830 or Atkinson or something similar don't mind a machine that needs work doing to it thanks

Forum statistics

Threads
158,197
Messages
3,614,834
Members
39,951
Latest member
Riaz khaliq khan
Top