Search results

  1. the-mad-welder

    Oil Question

    Can the learned collective tell me if these two the same thing and can I use one to top up the other?
  2. the-mad-welder

    Kubota Rotavator

    Has anyone got or can point me in the direction of a parts manual for a Kubota RS1300 Rotavator please?
  3. the-mad-welder

    Door Frames or Perhaps Something Else............?

    I have three of these, which were intended to be doors but the project was shelved. They measure 2950mm tall x 1500mm wide and are made from box section. The long sides are 120mm x 60mm box section, one side is 3mm thick and the other is 5mm thick and was intended to to be the hinge side. The...
  4. the-mad-welder

    96mm Grey Telecom/BT Ducting

    Just putting the feelers out. We have about 10x 6 metre lengths of the above for sale as well as various bends etc. All new and unused and been kicking around for about 10 years. Its all stored undercover, tucked away at the back of the shed, behind various other crap. If there's any interest...
  5. the-mad-welder

    Kee Klamps, Key Clamps, Tube Clamps, Handrail Clamps, Pipe Clamps & Other Name Suggestions Welcome!!

    As per the title. Its a job lot of whatever you call these, I always favour Kee Klamps even though these aren't actually that brand! Left of the main picture is all the ones to suit 48.3mm/scaffold tube size. Right o the main picture is the ones to suit 42.4mm tube At the top we have a few to...
  6. the-mad-welder

    Conus 1 Weld In Bushes

    Conus 1 weld in bushes as per pictures. £5 each ex vat. 20 available. Collection welcome (free cup of tea!), can quote for delivery if required. PM with postcode.
  7. the-mad-welder

    Planning Amendment

    Do we need one? Planning was passed earlier in the year for a house extension. We were going to have aluminium windows and it was passed on this basis. We might now want to go for UPVC to get the project back within budget. The rest of the house is already UPVC so do we need an amendment to...
  8. the-mad-welder

    Q Fit Brackets

    If anyone is interested I have some one piece profiled ones from 25mm plate for £70 ex vat per pair. Delivery £12 ex vat to most UK postcodes, subject to checking it. I have some left over that are a bit rusty, hence the price, nothing major that a quick clean would not sort out. I also...
  9. the-mad-welder

    Abrasive Discs

    I've had a re-stock of discs and thought i'd put them all in one thread rather than try to update all the original ones as some prices have changed a little. It'll also be easier to mix and match this way. All prices exclude VAT and delivery. Delivery cost is dependent on weight and delivery...
  10. the-mad-welder

    13.6 x 38 & 12.4 x 24 Wheels and Tyres

    Dad insisted these had a thread of their own, he's worried they'll get lost amongst my crap!! Measurements to the best of my ability/knowledge!! Pair of 13.6 x R38 Taurus tyres, somewhere about 60% tread. 8x 32mm holes on an 8"PCD with a 140mm centre hole. The centres have unfortunately been...
  11. the-mad-welder

    the-mad-welder's New Year Declutter!

    As per title, thanks for the inspiration @bobk and @Will 1594! And apparently its the done thing to tag serial hoarders @Dave W and @Nearly I've put a few random pics on here, please PM for pictures if anything sounds remotely interesting!! Collection from IP31 3BE preferred, I'd rather...
  12. the-mad-welder

    Weld On Loader Brackets

    Updated prices for the coming year.
  13. the-mad-welder

    M12 x 25 Countersunk Bolts, Approx 1500 of them!

    Any interest in the above? Black socket head bolts, there may be a few 30mm long ones mixed in for good luck!! Weighs in at about 43kg, collection from IP31 3BE preferred but can deliver if required. £25 ex vat
  14. the-mad-welder

    240v Straight Line Gas Cutter and Track

    Selling this as I have not really used it since buying my CNC cutter. All seems to be working fine, moves both directions, speeds up and slows down and torch adjustment working in all directions. Comes with a 1x 6' length and 1x 3' length of track. Could possibly benefit from new hoses and...
  15. the-mad-welder

    Tyrolit 9"/230mm x 2mm Cutting Discs

    Tyrolit 9"/230mm x 2mm Cutting Discs In packs of 10, 25, or 50, expiry date of 2022. 10x discs £22 25x discs £45 50x discs £83 Prices include vat and delivery to most UK postcodes. Some Areas/Postcodes may attract a delivery surcharge, these are listed below. If you are located within any of...
  16. the-mad-welder

    Norton Neon 40 Grit Zirconium Flap Discs

    Norton Neon 40 Grit Flap Discs in packs of 10 discs. £10.80 per pack inc vat. Can send one or two packs via Royal Mail 2nd Class for £3.50 to UK postcodes. Can quote for delivery of larger quantities, just let me know a postcode.
  17. the-mad-welder

    Norton Blaze 115mm Rapid Strip Discs

    Norton Blaze Rapid Strip Discs You can buy one or several, no minimum order! They are £5 each ex vat, £6 inc vat Between one and ten discs would cost £4.50 inc vat to deliver via Royal Mail 2nd Class Singed For. Happy to quote for more than ten discs if required...
  18. the-mad-welder

    Dronco Attack 115mm x 1mm Thin Inox Cutting Discs

    Back in stock!! Dronco Attack 4.1/2"/115mm x 1mm cutting discs. In packs of 25 discs. Expiry date 2022 25x £14.50 50x £26 100x £50 Larger quantities by quotation. Prices include VAT & Delivery to most UK mainland postcodes. 25 or 50 discs are sent via Royal Mail 2nd Class, larger...
  19. the-mad-welder

    Z Purlins

    Looking for a price on 10x 20ft x 6"/150mm deep purlins, unpunched with no holes. Delivered to IP31 3BE please Thanks in advance Regards Paul
  20. the-mad-welder

    Z Purlins

    Looking for 10 new or used 20' Z purlins, ideally 150mm/6" deep. The closer to Suffolk the better!!