Search results

  1. Bobthebuilder

    Today at work

    Starting to get cattle shed ready again, some of the barriers need a little bit of tlc after 20 yrs in the 💩 hence the makeshift workbench
  2. Bobthebuilder

    Today at work

    Is any bit of metal safe 🥴
  3. Bobthebuilder

    Fertiliser Price Tracker

    Only 7t still to come all on pre harvest order, also a couple of loads of N&S, MOP and TSP still to come, gonna be tight for space 🙈
  4. Bobthebuilder

    Post knockers…. Thoughts and opinions

    Have had a parmiter here for years and knocked plenty of gate posts, sleepers and fence posts in without augering any holes, sometimes takes a bit longer if really dry and hard but never failed yet, got a new Bryce on order tho
  5. Bobthebuilder

    Cleaning out pot ale tank.

    Hot water pressure washer would be better as it dissolves better but the drain jetter should work
  6. Bobthebuilder

    Fertiliser spreader tray testing

    If you need to check it every time you use it its about time you had a new spreader 🤔 do ours every other year in a grass field, check 4 products normally takes a couple of hours as long as not much faffing about needed, we'll spread well over 300t/season and never had an issue with striping yet
  7. Bobthebuilder

    Tractor on Motorway cops tonight Channel 5

    Think the copper needs to go back to school and learn the law 🤔🙄
  8. Bobthebuilder

    Today at work

    The tag team, managed to get a pic of both outfits before the combi was taken off this morning and finished the last 10ac with the pronto this afternoon
  9. Bobthebuilder

    Today at work

    The obligatory end of sowing pics
  10. Bobthebuilder

    feeding big bale silage

    We just put them in ring feeders
  11. Bobthebuilder

    Starting to get worried about the wet weather ?

    110ac sown today but rained off with @10ac left to do 🙈😏
  12. Bobthebuilder

    Managing Flat 8's as efficiently as possible

    You won't be able to cross them when stacking unless you pick bales up side ways or stack in squares of 32/layer
  13. Bobthebuilder

    Managing Flat 8's as efficiently as possible

    Most efficient way would be a 56 bale carrier, as by the time you've loaded a trailer and tied them on you could've cleared more stacks, we'relucky enough to only do a couple of thousand hay and straw, clear stacks into shed with carrier then stack with forklift and flat8 grab, I turn the bottom...
  14. Bobthebuilder

    Today at work

    Managed to bag another 30ac thisafta, hopefully get another 25 tomorrow afternoon before the rain again 😏 then just 160ac left to do
  15. Bobthebuilder

    Best straight from stubble tilth seed bed maker?

    Gonna struggle with only 105hp to have any machine to do any good😏
  16. Bobthebuilder

    Starting to get worried about the wet weather ?

    wet again last night :facepalm: just as it was drying nicely, 7days showers forecast in the next 2 weeks, hopefully get going again in the next day or so, just 10days dry would see us done :cautious:
  17. Bobthebuilder

    CF Nitrogen production?

    Pleased I’m not paying for it, that’s 4 loads in the shed now and 1 load of N&S
  18. Bobthebuilder

    CF Nitrogen production?

    No it was stampers, just what we ordered as had sone left from last year
  19. Bobthebuilder

    CF Nitrogen production?

    Wagon load in here this morning and coming back later today with another load, only 7t balance to get after that then a couple of loads of N&S
  20. Bobthebuilder

    Amazone packer roller

    The kg and Kuhn blades are very similar and if you Amazon has a little wear the Kuhn blades will fit
Top