Search results

  1. C

    11.00 x 16 front wheels fit ford

    Thanks but ils 11.00 x 16 il after
  2. C

    11.00 x 16 front wheels fit ford

    11.00 x 16 front wheels fit ford Suit ford 2 wd 10 series
  3. C

    Kuhn axis actuator

    To fit 40.1 quantron control
  4. C

    540/65 r 38 tyres

    After a set of part worns
  5. C

    18.4 x 38 tyres

    After a pair of 18.4 r38 tyres . Part worns Thanks
  6. C

    Blue light placement for sprayer boom

    They want to be somewhere where they can’t get knocked off. I’ve seen them sticking out the back looking a little vulnerable
  7. C

    Blue light placement for sprayer boom

    Got a couple of blue lights from UTV products to go on my Househam sprayer. Where is best to mount them? Side of sprayer shining back/sideways ? Under boom shining across? Rear shining forward
  8. C

    Repairing electrical wires outer sheath after small fire

    Old wires all cut out . New ones soldered in and shrink wrapped. New plastic conduit. Thanks for advice .
  9. C

    Repairing electrical wires outer sheath after small fire

    The copper wires themselves are totally intact hence not wanting to cut them. Looks like I best cut them add new wire and heat shrink the connectors . Got a mechanic coming up this morning to solder and shrink wrap. Taped them up and did a test run last night and all worked ok. Think we were...
  10. C

    Repairing electrical wires outer sheath after small fire

    Had an incident on the combine this evening . A small oak branch had landed on top of engine and set fire which in turn set fire to the wiring harness by engine. Luckily we put it out but kept about 12 wires fused together. We pulled them all apart and now need to recover them . Most about 5...
  11. C

    Mole plough

    Single leg moleplough . Linkage or Trailed
  12. C

    Today at work

    Still seems to be doing a good job!
  13. C

    Today at work

    What’s the idea with having some tines facing different ways?
  14. C

    650 65 r42 &540 65 r30 Michelin

    Worcestershire
  15. C

    650 65 r42 &540 65 r30 Michelin

    Bump after another set
  16. C

    Fendt 700 series front pto

    To fit 724. Thanks
  17. C

    Tightening up Claas liner rake arms sleeves

    Thanks I enquired but annoyingly they don’t do the kit for my 680 liner. Only the 780/880
  18. C

    Opico sward lifter.

    I had a 5 leg opico Sward lifter, it was crap . Not heavy enough to get in the ground. Sumo LDS is what you want
  19. C

    Tightening up Claas liner rake arms sleeves

    Got a 680 liner . Brill rake but movement in rake arm sleeves. Never need to take off for transport. Saw a pic with these clamps on. Are they a Claas part? Or any other tips to remove some slack apart from new sleeves which are ££££ mine current sleeves are the linchpin style type
  20. C

    Malone Tedder

    Bought one in the winter. Looks v well made. Lots of positive reviews about
Top