Search results

  1. A

    Redlynch Tractors

    Hi, looking at a machine at Redlynch tractors it’s a long distance from me. How have others found them to deal with? Tia
  2. A

    T7 Dash button brightness

    Press the buttons next to adblue level on dash
  3. A

    T7 Dash button brightness

    Turn the brightness down ?
  4. A

    CX radiator

    Hi, whilst servicing round the combine today I noticed that the radiator had a lot of wet dust stuck to it on the bottom section and also underneath the radiator itself. The radiator appears to be in three sections, a small top one then large middle section then a small bottom section. Will...
  5. A

    NH CX860 Straw elevator lower shaft dishes

    Remove chain and fold a piece of flat steel round welding in situ as you go 👍
  6. A

    Accord disc coulters

    Thanks @yellowfrog i have searched drapers web page and they have discontinued both them puller sets 🤦‍♂️ thanks anyway.
  7. A

    Accord disc coulters

    Hi, I am currently changing the discs on my Kv/accord combi drill and some of the disc bearings are worn so replacing them too as I go. Is there an easy way to pull the bearing and hub of the shaft as they are very tight. Can’t get bearing pullers on very well as back of the hub is too close to...
  8. A

    Slurry tanker question

    It’s on a Joskin tanker. Might see if I can get a new cone from dealer tomorrow. Will they be dear?
  9. A

    Slurry tanker question

    Thanks @Cowabunga that does make sense I will look see if the angle of the splash plate can be adjusted to make it spread wider
  10. A

    Slurry tanker question

    Hi, this may sound daft but I am going to put slurry on top of some spring barley/wheat tomorrow, the previous owner of the tanker has cut a piece off the end of the rubber nozzle for the splash plate. Will this affect how far the slurry spreads? Ideally I would like it too do 12m so to go In...
  11. A

    Spring wheat nitrogen

    I will try a field of each and see which yields best! 😉
  12. A

    Spring wheat nitrogen

    Thanks guys. Is 175kg/ha of nitrogen sufficient in total?
  13. A

    Spring wheat nitrogen

    Hi all, first time sowing spring wheat tomorrow, is it best to put all nitrogen in seedbed as I do with spring barley or put half down now and half later? Tia
  14. A

    Tractor discounts

    The reason I ask is that both tractors list price is very similar but the retail prices are a few thousand different. Annoyingly the colour of tractor o would have preferred to have bought retails as the more expensive of the two.
  15. A

    Tractor discounts

    Hi we are in the process of buying a new tractor. We have had quotes back from a couple of dealers but the difference in list price to retail price is quite different between the two, i.e. the % the dealer has allowed. What % discount would you normally expect to be given off list price? Tia
  16. A

    Lime cost

    The feed mill/merchant who I use for feed and fertiliser supplies did the soil tests for me. The results came back saying 50 acres needs 3t/acre so I need 150t to do the job? I am based North Yorkshire area thanks
  17. A

    Lime cost

    Maybe 20/25 miles to a local quarry, we have high mag soils so I guess we would want calcium lime not mag lime? Will a muckspreader with a spinning deck cope with lime? We hire one to spread chicken muck already.
  18. A

    Lime cost

    Hi I've had some fields soil sampled and a couple have come back wanting lime applied. It's something we have never had to do before, what would be a rough figure for cost of lime and application. In general the two fields are wanting 3t/acre over the 50acres so 150 t in total. Tia
  19. A

    Horsch front hopper

    So if you were putting fert and seed on together would you mix down one distribution head so they are placed together or go seperate with the fert spout putting the fert more on top of the seed row?
  20. A

    Horsch front hopper

    Clive did you run seed and fert down one pipe to the back into a single distribution head or blow them separately? @Alistair Nelson what toolbar will you be running on the rear?
Top