3 pairs of large used industrial concertina sliding doors.
Each pair is for 6m x 6m doorway (approximately, will get more exact measurements in due course). I believe these can be easily cut down or reduced in width if necessary)
Very good condition with no dents.
Brought as part of a job lot...
Could anyone be so kind to give approximate price for 25/30ft wide lean to an existing steel portal potato store 80ft long. 16ft *(not 20ft, re edited)* bays with a fibre cement roof. With no cladding on both the side and ends. Price including installation and manufacture.
Got a large quantity of 5/20/25L oil drums and finding it very difficult to find a recycler/disposal company which take these. Even spoken to Witham oil and they couldn't answer the question. Very frustrating. Only quote I received was for £5 a can which is eye watering. Happy to drain and clean...
Quite simple, what's the best brand of cantilever toolbox. Had and seen plenty of one's are too thin or the linkages have broken. Don't mind paying for good value. Facom, Beta, Bahco, Britool etc. Obvious extra points for British made ones!
Looking for the following drill for a project
-land wheel spider wheel unit used to drive the seeding mechanism preferably Accord/Kerrag.
-Accord front mounted drill hopper without seeding mechanism.
-PTO to hydraulic fan kit for the Accord/Kerrag.
Looking for a back load from Bristol to Ely, Cambs (3 miles from Cheffins Cambridge Machinery Sales Ground) for dual axle lorry bogie and chassis approximate 20ft length (Can send pictures if requested) Seller can load. Not in a rush.
Looking for inexpensive step frame trailer in working, road worthy order (can fix lights).
Preferably 40-45ft, with shorter swan neck and longer main deck but anything considered.
Would consider curtain-sider to cut down.
Preferably in East Anglia also.