Search results

  1. H

    Deutz fahr 6165 no ignition

    So I've got 12.6 on batt and starter little relay in fuse box click when I turn key but no ignition at all
  2. H

    New holland tier5

    Just a quick one we run new Holland tier 4 b 7.210s ATM we have just demo a t7.210 tier 5 has anybody noticed they seem noisy in the cab?
  3. H

    New holland tier 5

    Just a quick one we run new Holland tier 4 b 7.210s ATM we have just demo a 210 tier 5 has anybody noticed they seem noisy in the cab?
  4. H

    Tractor chip

    Will a steinbauer chip off a t 7.210 tier 4b work on a T7. 210 tier 5
  5. H

    Valmet a 93 brakes

    Just stripped an a 93 three of the discs each side are like new but the one against the brake activator is back to metal. Any ideas why they don't wear evenly
  6. H

    International 475 hydraulic problem

    I am working on a 475 the steering is fine but the hydraulics are very slow unless I work the spool valve. Tried new filter
  7. H

    International 574 hydraulics

    Got a 574 oil plus filter is new. The issue is with the hydraulics. The link arms are very slow to lift unless I use the spool valve at the same time
  8. H

    Bobman bedders

    I am looking at a self proppeled heel stone swerper come bedder.has anyone used a bobman ?
  9. H

    Jcb teletruk 30dtlt

    Basically the 4wd does not appear to be working and drive predominantly on one wheel?
  10. H

    Manitou hydraulic pump

    Anybody got an after market pump to replace ma269085
  11. H

    What double cab for £10.000

    Looking at a isuzu d max are the autos any good? Rangers sound fuel heavy and don't want a l200 any other recommendations
  12. H

    Mxu 115 problems

    This is the brake disk the bits in the middle were found in the canister filter the squares are about 5mm any idea where they come from
  13. H

    Dump trailer rules

    We are intending to move soil from a building site to a field. We will be travelling on the road do I need to do anything other than using white diesel?
  14. H

    Lely parts

    Is there still an issue getting lely parts? Where the best place to get reco 40 bits
  15. H

    Siku rc tractor fault

    Slightly different one but does anybody know why my sons siku fendt steers itself in one direction and the motor keeps clicking instead of cutting out?
  16. H

    Manitou 634

    Our manitou 634 has a fault on the swl When you start up the buzzer will not go out and one orange and one green light stays on any ideas thanks in advance
  17. H

    Merlo 28.7 suddenly lost drive

    I was loading the waggon this morning and backed out of the pit and came to a standstill. If you put it in neutral it will freewheel so seems to be selecting gear OK. Electrics seem OK you can hear a slight oil noise when you rev up but no movement?
  18. H

    Amazone 602 chain jumping

    We have an amazon 602 8 row maize drill Ed classic 2003. We have replaced all the drive chains, they are 1/2 inch. The problem we are having is either the drive chain to the main gearbox or the chain on the small gearbox that drives the hexagonal shaft is jumping. The boxes appear to be turning...
  19. H

    Ovlac ploughs

    We are thinking of changing our kv es85 200 for a new ovlac 5 furrow reversible auto reset vari width Please just info on the ovlac I don't want a kuhn dowdwell or lemken I'm sure they are good ploughs but just want to see what people know about ovlac thanks
  20. H

    Ovlac ploughs

    We are thinking of changing our kv es85 200 for a new ovlac 5 furrow reversible auto reset vari width Please just info on the ovlac I don't want a kuhn dowdwell or lemken I'm sure they are good ploughs but just want to see what people know about ovlac thanks
Top