Search results

  1. rob h

    Simba freeflow seed flow issues

    Just had a look at the pictures.you may be on to something why not use a single pipe and just alter the gearing on the metering wheel
  2. rob h

    Simba freeflow seed flow issues

    i have a miniflow same metering unit. with wheat i run it with the flaps set to 3 and fan speed 2800.pipes run flat across the back and not had any problems even at high seed rates.2000 would be more like fore drilling rape
  3. rob h

    MF 6400 dyna 6 flashing R- F- in gear screen ?

    Ours only has one screen on the right.no left hand screen
  4. rob h

    MF 6400 dyna 6 flashing R- F- in gear screen ?

    I may be wrong but is that the warning of gearbox oil too cold on frosty days .stops when it's warmed up a bit
  5. rob h

    Freelander Question

    Are you sure that it's a hydraulic problem.i bought one with a non working clutch but after checking it out I found the pedal box under the dash was flexing as the welds had cracked.swapped it for one off a breaker I had and it worked perfect.
  6. rob h

    track marshall 120

    We used to run a pair of them.this one was used as a parts doner. It makes a handy fuel bowser trailer with a tool box and passenger seat
  7. rob h

    track marshall 120

    look on face book their is a track marshall group
  8. rob h

    Mf 6465 lost drive

    ok thanks for the replys.we are still drilling so it will have to wait till weve finished before i start pulling it apart.
  9. rob h

    Mf 6465 lost drive

    Have a problem with our 6465 t2 dyna 6 . Lost drive whilst going up the road just free wheeled to a stop.showing error code t1.37. Slippage in the power shuttle. all hydraulic and pto work.when i try setting off it rocks forward like its trying to move but that’s all.ive had gages on the test...
  10. rob h

    Today at work

    Haven't had this out of the shed for 3years .but this year it's too wet for the miniflow
  11. rob h

    Stiga mower engine problem

    Ours let us know by throwing the piston out the side.still ran but a bit rough.foung a second hand engine of a scrap mower and been good so far
  12. rob h

    Today at work

    back on the plough
  13. rob h

    OBD2 DTC readers

    plenty of second hand snap on for sale .as people up grade to new models.
  14. rob h

    Tyre Kickers

    York will put your machines all together in a row and advertise it as a retirement sale.it will get sold with the rest but grouped together
  15. rob h

    Farm fans,gsi drier wanted,any age ,bigger the better

    Theirs a couple in Wright's farming register
  16. rob h

    Kongskilde grain cleaner

    ive managed to speak to les .he is having a look
  17. rob h

    Kongskilde grain cleaner

    ive tryed ringing les 3 days running and no one answers. what is youre cyclone aspirator.i need something to keep up with a 6 inch auger
  18. rob h

    Kongskilde grain cleaner

    ive tryed plot feeds he only has new and it would be to order.been right through ebay and face book .cant find anything.
  19. rob h

    Kongskilde grain cleaner

    i cant find it .do you know what its listed as .
  20. rob h

    Kongskilde grain cleaner

    Hi I'm looking for a pre cleaner a kongskilde kf20.ideally
Top