Search results

  1. gorgous

    Barth k140 mk3

    Bit hard to see condition from that one picture would hazard a guess at 5-10k. We have a wheeled version in good condition we think it is worth 10-15k. You might find a collector who would offer you a lot more (y)
  2. gorgous

    Classics Earning their keep.

    Rad screen is in shed I ordered the replacement glass should be here today ready for putting the bob on. 👍
  3. gorgous

    Classics Earning their keep.

    Cut a bit of grass yesterday.
  4. gorgous

    John Deere 9560

    Have you tried ringin a long term Case IH dealer like startin tractors? They might be able to help my guess on green one would be electric side knife no idea on yellow one.
  5. gorgous

    Green star not working since update

    Look on for update I couldnt find it on was
  6. gorgous

    RPA appeal

    Dont know how to write this without offending you which is not what I am trying to do but it Sounds like you could do with some support lots of helpfull people to speak to above.
  7. gorgous

    RPA appeal

    Really sad to hear you have had to make such a hard decision. Hope whatever you turn to next works out better for you.
  8. gorgous

    Horsch 4ST ridging

    My drill is the same as psq but discs ok so far.
  9. gorgous

    In furrow ploughing on 710s

    I am afraid I could not find a part number on them heres a few pics. I would recomend speaking to Alan at tuckwells Maulden he would be able to find the part number, problem is hes sheltering at moment.
  10. gorgous

    Muller trac guide 2

    Sorry I was assuming your spreader is isobus and your plugging it into the trackleader basic tractor wiring loom isobus socket. If your wanting to use serial out to the amatron3 box then this is what the manual says for amatron 3 software version 1.09.00 it will provide target rate but not...
  11. gorgous

    Muller trac guide 2

    Yes it should according to aef database. You will need the unlocks on tracguide though. I know nothing about amazone spreaders whether you need a unlock for the spreader etc. I run my kuhn spreader section control through a tracguide2 works well, easy to use etc. What unlocks you got on screen?
  12. gorgous

    In furrow ploughing on 710s

    Yes I will try to remember to have a look tomorrow see if I can get a part number for you.
  13. gorgous

    Condensation in shipping container

    You want 10 vents minimum really, dont site them so no airlow to vents. Insulation helps but what are you storing? If your puttting something wet or damp in there it will cause condensation. Only condensation we get is the people who store mowers and the like, dry furniture paperwork etc never a...
  14. gorgous

    Best shipping container padlock

    We use the cisa only now for the simple fact they have been most reliable in terms of not seizing up falling apart etc compared to other brands we have used. As for breaking in all of the boxs etc can be cut open eventually. I supply locks to all of our containers and keep a spare as much easier...
  15. gorgous

    Steel frame buildings - where to buy

    I have been using these guys been competitive for me. I have been getting them to supply and erect but they do kit buildings also.
  16. gorgous

    Bucks land drainage.

    Chap who worked for us when I was a nipper used to drive for them. He taught dad how to drive our machines. He came to us when they packed up late 80s we think. Nobody took them over. Dad thinks the family who owned bucks drainage was called Turnock. Am afraid chap who worked for us is long dead...
  17. gorgous

    Roller shutter door motor and gearbox

    You need to find someone who knows what thyre doing to spec it. The amount of preload on the spring is different on a manual door compared to direct drive or inboard mounted motor. A motor system will have a chain for emergency use takes a age to open though.
  18. gorgous

    Multipurpose trailer

    I bought a Bailey ct20 with grain side extensions the exact size your asking. It did not turn up in time for harvest though I did fill it with wheat for when mobile seed cleaner came. Have started hauling some hardcore with it and so far very pleased with it.
  19. gorgous

    This is a weird one ...

    Have you tried the samsung semi industrial waashing machine? bought one about 10 years ago for b&b was £1200 still gong strong. It replaced two domestics which lasted about 2 years on average.
  20. gorgous

    CASE IH MX270 40km/h?

    Ours wasnt as fast as a 40k deere. If thats any help.