Search results

  1. S

    Cover crops and glyphosate

    Yea, could be a problem to roll in the winter, but how do you feel weed control of glyphosate is in spring vs. fall? Here, normally its applied after harvest before ploughing or if the soil is left undisturbed, and then direct drill or some sort of tillage in the spring before drilling. Not many...
  2. S

    Rauch 30.2 H+EMC

    This was related to the load-sensing connection not being properly seated. After a few tries, everything started working :)
  3. S

    Fendt Varioterminal touchscreen doesnt work

    Couldnt find anything that matched, the one i got from Ali had the wrong connectors :) Think i would send some of the "approved" shops mentioned earlier here a message and see if they can send.
  4. S

    Cover crops and glyphosate

    Hi, Im a beginner in covercropping and conservation ag, and i wonder if anyone have any thoughts/experiments on running glyphosate in the spring vs the ordinary fall application? I know there will be less time (we have quite a short season in Norway), but other then that - blackgrass control etc?
  5. S

    Rauch 30.2 and spreading vetch

    Hi, Going to spread some green cover with different types of vetch and raddish - not quite certain about the spreader settings for this mix, anyone know? RPM 900, height of spreader at 50-50 cm and flow factor at 0,74 is a suggestion for raddish, but not sure if the raddish is the dominant...
  6. S

    Rauch 30.2 H+EMC

    Hello! So, got my Rauch 30.2 H EMC connected and ready to go. Having some newbie-problems though - everything is ok in the Rauch Isobus terminal, I’m in the field with boundaries and contour-lines set up - but I can’t get the discs start rotating. I had to screw in a screw in the hydraulic...
  7. S

    Fendt Varioguide and field marking

    As always much appreciated!👍
  8. S

    Fendt Varioguide and field marking

    Sorry to hijack my own thread here @Boysground , but do you know how to lock a certain contour segment? I found a video, but must be older software🤔
  9. S

    Fendt Varioguide and field marking

    Thanks a bunch - as usual this is forum knows all :D
  10. S

    Fendt Varioguide and field marking

    Thanks, no need to change anything under map settings in addition to this red squared button?🤔
  11. S

    Fendt Varioguide and field marking

    i just want to mark on something else then just driving. As default, the field will be marked by the implement width just by driving over it. I would like the marking to only happen at some specific trigger - like dropping the drill, or enable autosteer. This will help a lot when drilling...
  12. S

    Fendt Varioguide and field marking

    Hi, On the varioguide terminal, is it possible to mark worked area based on say the «go» button? So that i only mark the map when i click «go» and enable varioguide, drop the implement and so on. Also stop marking on «end».
  13. S

    Fendt 516 S4 losing power

    Well, you saved me quite a lot of money :D So are the ad-blue issues fixable yourself, or shop-material?
  14. S

    Fendt 516 S4 losing power

    Thanks for your replies - @Chuckie hit it on the head, intercooler hose had come lose, good as new now! :)
  15. S

    Fendt 516 S4 losing power

    Hi, Out harrowing with a 3m carrier today, and suddenly it felt like the harrow was working at 1 meters depth - tractor struggeling to keep 12 km/h on a flat field. Took the harrow off, but it still seems very dead, cant get up to any speeds, any uphill seems to drain it of power. Could i have...
  16. S

    Fendt RTK and inaccurate waylines

    Thanks @Boysground , will check it out!
  17. S

    Fendt RTK and inaccurate waylines

    Hi, Been experimenting with varioguide on RTK (rookie with autosteer here), and just doing simple A-B lines with a 3 meter Carrier. Staying on the lines seems to work as expected, but as i work through the field. When doing the last 3 meter wayline i would expect this to "fit" perfectly with...
  18. S

    Trima +4.1 removal

    Yep, just tried - the pins move way easier after some greasing, now ill just need to learn how to get it back on :D Fun, albeit embarrassing little evening project. Thanks again, this forum knows all!
  19. S

    Trima +4.1 removal

    Haha jesus christ, thanks guys! That thing must have never been moved, but ill give it some force tomorrow :D Thanks again!
  20. S

    Trima +4.1 removal

    Yea, the green knob has to be pulled out before i can move the lever up, so seems to be correct ref the manual - but i guess im doing something wrong with the hydraulics, the frame wont budge :O
Top