Search results

Need 4 on 10 stud centres please. 500 65 22.5 would be ok if cheaper cheers all

You tried chafer

Thanks . That's great advice. Will pop and see her. Sometimes if you think about stuff too much you won't do nothing

Thanks again. Silly question. I guess there's a dipstick for the gearbox. I'm try to load a picture up. She's at cleanacres.

Thanks for all the advice. 1 problem I got is it comes on 600 wheels. And no row crops. It sounds like there abit hens teeth. Does the gearbox play up at all. The 50 km would be handy

Failed to put a picture up. Looks like it has 8 studs on the front and 12 on the back. Think its leaf springs. Knight sprayer

Looking at a high houred sprayer outfit. 13200hours. Won't be doing many hours a year but will this be a big gamble . what to look out for when I go and see it. Currently got a case sp. More power on the banks would be good. And a mechanical drive it should fly. All advice please

Ok thanks

How much and are the back ones available

I got a set but would be more like 15 %. brecon.

No good then. Only done 4000hours

Any 1 run 1. Looking at a second hand one with low hours on a 54 plate. Ugly as hell but the right Price. All advice please

On my old js 13 there was a small plate in front of the engine one where there was a grease nipple. I'd never know it was there. It started to grumble. A good grease sorted it

Try llansilin tractors. They have a good name. They have a very low houred 6465 and 6480 t2

Just had a new jb 400 tree shear. Really pleased with the build quality and weighting 800kg it's well made. But cutting capacity is crap. 20cm and its struggles. On a doosan 14tonner with no known fault. Any1 else got 1 that will cut the size they say they can

Just had a new jb 400 tree shear. Really pleased with the build quality and weighting 800kg it's well made. But cutting capacity is crap. 20cm and its struggles. On a doosan 14tonner with no known fault. Any1 else got 1 that will cut the size they say they can

Just had a new jb 400 tree shear. Really pleased with the build quality and weighting 800kg it's well made. But cutting capacity is crap. 20cm and its struggles. On a doosan 14tonner with no known fault. Any1 else got 1 that will cut the size they say they can

Do you know the fastest gears you can use. I got some but it says on the chart that you can f**k the gearbox when you reverse it when blocked.

Sorry for the slow reply. Davies machinery in carmarthen sell them.