Search results

most off the time its a side sloping field :(

Side plates are pretty good order and straight i measured the center belt and it was nearer 70mm Plating would be cheaper than another web

Any one know what the belt width on a Reekie 350 first web should be originally .Having bother with stones getting in the bed between frame and web .Gap between frame and edge of belt is almost 30mm remaining width of belt about 52mm Annoying thing is bars in not bad nick it a 36

Looking to get a pair of forklift forks from Portadown into Scotland Forks are 4ft long

Looking to haul 2 forklift forks from Brackley into Scotland Forks are 4ft long

Grammer seat sitting on its arse won't pump up Checked fuses OK pulled apron of put 12v straight to compressor fired up right away but weird thing is that there is 12v at the pump connectors when you pull the handle but pump does not fire up Any suggestions?

Sorry about the quality of picture part No is 20/925660

Does anyone know the make an model of the hydraulic fan motor on a 536-60 its a reversible one. It is leaking at the output seal and spattering the engine in oil. Has anyone tried rebuilding one.i presume if the seal has gone it's down to wear in the internals Thanks

I find cold weather and draughts makes it easier

Utv ones on the boom

Thanks for that Even a picture where the cable goes into the cab would be good

Thanks a picture is most helpful Have you any idea how far into the cab you have to go to pick up the connector that's hopefully ther waiting I assume its there as there is a fuse and relay already fitted

Yes being doing it for some time

Thanks for all the replies very informative. Never realised that metacam along with the AB is important as well . We are very particular about keeping the lambing shed clean and dry but not so easy at the peak of lambing.We don't actually dip navels but spray instead another entry point could be...

Anyone wired Boom lights on a 536-60 ? I have the loom but not sure about the routing does it fix on the side or bottom of the Boom. Where does the loom enter the cab and does it have to go the whole way to the fuse panel There is a relay and fuse already installed and a cable already waiting...

Thanks all Job done all lubed up and ready for action 😁

Dirty minded bu☆☆ers sorry to dissapoint Thanks for the help Nothing more satisfying than finding a hidden nipple 🤣🤣

Have a new to me Jcb 536-60 trying to find the dam grease nipple on the bottom end of the main lift ram. Is it in some weird inaccessible place

Any thoughts on how this is affecting lambs .Always seems to start 7-10days old see lambs trailing a leg / limping .We lamb indoors wonder is there a connection between footrot and lambs getting infected ,the vets reckon could be more likely mastitis link. Tried Draxxin for a longer cover and...