Search results

  1. Zebbedee

    DD rings?

    Anyone got a rough price for DD replacement, 26 pairs of the 550 mm size
  2. Zebbedee

    Weldex led lights as fitted to Case

    As title looking for a supplier of weldex led lights pt no weldex WDWL-5R30DT-BK comes up on google but not seeing a british supplier? Anyone help? They are an oval light as fitted to Case tractors 30w and very good lights
  3. Zebbedee

    Tig welding newbe

    Looking at getting a tig welder but no idea what I need.? Have a 400amp Lincoln mig with separate power source can I use it to power tig unit? Want to weld normal steel steel along with stainless and aluminium Would rather a big industrial machine secondhand rather than a new hobby machine Seen...
  4. Zebbedee

    Dumper trailer wanted

    Any decent dump trailers about bigger size wanted 16-20 tonne must be commercial axles and brakes
  5. Zebbedee

    Gritter wanted

    Anybody know of any tractor mounted or trailed gritters for sale needs to hold at least a tonne thanks
  6. Zebbedee

    Tractor mounted gritter

    Wanted a tractor mounted gritter preferably a Cuthbertson or vale type machine to hold at least a tonne anything considered from needing work to new condition thanks
  7. Zebbedee

    Plasma cnc table

    looking for a bit of insight into the world of cnc plasma tables already have a hypotherm 45 3 phase machine but would like to make some neat cuts etc so wondering how difficult to use etc and also where are they available at sensible prices
  8. Zebbedee

    John Deere 6900 stiff spools

    Got a 96 JD 6900 here and spools are tight to move once they go into the detents very tight to pull out, will it be a case of stripping th3 end caps or is there something else to look at don’t think it’s cables it’s definitely something on detents
  9. Zebbedee

    80 amp supply

    Going to pull a new cable approx 50 metres to a mobile grain drier hard wired to new 80amp breaker at main board then a socket on other end to plug drier into, would a 35mm swa cable be correct for that application
  10. Zebbedee

    Waste oil disposal

    What are people paying for disposal ? Been quoted £125 for any amount above 400 ltrs. Thought that was dear but we have around 1500 ltrs to move so not terribly much per litre really. What are others doing we are North Scotland thanks
  11. Zebbedee

    Case isobus question

    Hello have a case Pune with 700 pro screen running isobus for lemken drill, screen has section control available but needs a gps feed to control it, so how do I connect to my trimble fmx screen to give gps output feed?
  12. Zebbedee

    Kv press arm

    Looking for a press arm to suit a kv pl100 plough or even brackets etc thanks
  13. Zebbedee

    MCB circuit breaker

    What’s the next size of MCB up from 63amp is it then 100 amp
  14. Zebbedee

    MCB circuit breaker

    What’s the next size of MCB up from 63amp is it then 100 amp
  15. Zebbedee

    Paint for livestock trailer floor

    Looking for recommendations of paint for steel chequer plate floor on a livestock trailer? Shotblast and good primer first but then what ?
  16. Zebbedee

    Robson’s Structures

    Anyone use Robson’s for sheds ? Good or bad or any other recommendations closer to Scotland the better
  17. Zebbedee

    Portal frame steel sizes

    a quick question steel beam at 355x 170 ( not sure of weight at this stage) what width of building would you get at 6 m bays 15degree pitch and steel purlins and sheets about 5.5m high
  18. Zebbedee

    Diesel compressor

    Looking for a big diesel compressor 250 cfm upwards age not important but must be in good running order budget up to 5k for decent machine but really anything considered thanks
  19. Zebbedee

    Isobus?

    Anyone care to explain the ins and outs of isobus and how to ensure compatibility ? Case pro 700 screen and Trimble fmx screen available or Trimble gfx screen. Looking to start using isobus but know very little about it as regards what matches what machine I know a Vicon baler will work on the...
  20. Zebbedee

    ISO bus good or bad

    On new machines now is Isobus controls eg using tractor screen the way to go I,m talking primarily drills what’s the pros and cons
Top