Search results

I'll send you some next week when I'm at that shed 👍

No I wouldnt of kept them if they were cracked

Yes the shell skin fenders are available Go to British rubber for your front tyres Or I have some good used originals about 90% if you wanted them The new skins are pretty thin So tighten bolts up evenly to limit them deforming...

7.50s will drag on the steering if they did fit Personally I'd fit some genuine pattern goodyear tyres the reason being the middle bar stands higher and 40psi with good kingpins theres almost no drag. Mudgaurds trouble there is many have supply issues I've used agriline ones to be fair they...

Get them off agriline With no hassle returns if they are crap

Worldwide ford q cab do you mean? The bubble cab or super q If so- I've fitted a couple and to be fair they fit ok glass fits well Hinges fit ok Door in the opening fits ok too The outer skin is abit out of shape on the edges they might need abit of work But I've not fitted any for...

Light coats and often Just waft it on rather than flood it

At least you know there is oil in them I guess Them old leather seals are pretty poor especially when left to dry out only marginally better when they're damp.

Yes original is always best But against a deadline genuine parts can't always be found.... Yes I make quite alot of bits to a copy of an original I'll try anything to keep a job moving forward as long as I'm happy with it I'll keep it on if it looks naff I remove it Hardest thing is know...

@JLTate has a few classic fords that he is selling if you fancy a colour change

I'm looking at minting up a 1884 for myself Because its what I do - I do it, The amount of folk that slander me is tiring for having the skills I don't go out drinking or fancy holidays I work 80-100 hrs a week and think of ways to get things I want from something I don't want

Yes we did that one in the sale ( far to cheap ) It was our 1st county so alot to learn hence not counting all the hours on the build

Safety cab or weather cab ? Is it to fit around a roll bar if non safety

Should the fuel pump not be letter G that lines up, not C I could be wrong there though that might be the 23c I'm referring too, Double check you timing gears pops are on a tooth - in-between a tooth Just check your not 1 tooth out I'm not doubting your work but it can be easily toothed out.

Cold climate spec Norway model

Here she is And back at home in bed Been an emotional journey but these are the best ones

Thank you, brushes and aerosols are my main weapons of choice But mostly we use these for the bigger bits 😉🤣

Now now Calm yourselves... she is looking bloody lovely I might take this up as a job.

Thank you OK will do

A washer on a head bolt just nip them gently to hold the liner Make sure the edge of the washer dosnt catch the piston as it comes to tdc etc And double check your headgasket Some gasket were made offset and won't seal around the fire ring on the liner Which means it will breath and loose...