Search results

  1. RLC

    Hydraulic Ram Referb

    I have i ram which could do with a spruce up Rod is appox 2" and has approx stroke of 30". Could anyone tell what i would expect to pay to get a new rod put in and fresh seal?? TIA
  2. RLC

    Shot blasting

    Keep thinking about buying a blaster. Just for my own use really. Are the smaller pots you see on eBay etc any good? Anyone on here running a set up that can give me some advice?? Thanks
  3. RLC

    Row Crop Tyres

    Looking for a pair of 12.4 R36 (320/85) and also a pair of 14.9 (380/90 R46 row crop tyres. 25% Plus tread will be fine but must have no cracks/Perishing or uneven wear. May consider complete wheels if price is right. Thanks.
  4. RLC

    3000g tanker

    Anyone know of any tidy twin axle 3000g Tankers for sale? Ideally with rear linkage/brackets. Pm
  5. RLC

    8t trailer

    Looking for a cheap 8t tipping trailer with hyd back door. Doesn’t have to be pretty just functional. Could probably go to a 10t if right trailer. Yorkshire ideally. 07725097364 or Pm me if you know of anything. TIA
  6. RLC

    Dry Weather (North Yorks)

    Desperately seeking some decent weather if anyone knows of any? Doesn’t need to be the blazing hot type just the basic dry stuff would be fine! York area would be ideal but national fine. TIA
  7. RLC

    Keeble Sub soiler legs

    Anyone got any kicking about? New or used. Cheers
  8. RLC

    Cambridge

    Anyone there today? What was trade like?? Was going to go but thought travelling could be a nightmare.
  9. RLC

    Rubber sheet.

    Can anyone point me in the right direction as to where yo buy a piece of reinforced type rubber sheet. Need a piece approx 1.8m x 1.8m. 8-10mm Thick. Has to be one piece. Cheers
  10. RLC

    24m Pneumatic Fert Spreader.

    Looking for a KUHN 2224 or something similar. Ideally 2 if I can find them. Seen the ones floating about the web but looking for something cheaper if possible. Tia.
  11. RLC

    Taarup 832 Top Rotor Bearing

    Anyone able to tell me the way to get the top rotor out of an 832 type straw chopper to change bearings?? Tia
  12. RLC

    14.9 - 46 Row crop tyres.

    Tread not too important. An even 25% plus would be fine. No cuts or cracks. Thanks
  13. RLC

    Baler. Thetford to York

    Round baler to move. Time to suit. Looking for quotes? Cheers.
  14. RLC

    Dowdeswell plough press

    with press arm. Was used on a 6f DP7. £325. No VAT
  15. RLC

    Horstine Cascade Micro rollers.

    Does anyone know of any going spare or a machine with them fitted?? TIA
  16. RLC

    Front Weight box ???

    Seem to remember someone manufacturing a front box with the option to put extra weight in the front with forklift tines?? Thought it was Phil Watkins but cant see one on his site?? Anyone help??
  17. RLC

    Low loader (for drill)

    Looking for a used low loader trailer to carry a 4m combi drill. Must be at least 2.5m wide. Needs to be strong with hyrdaulic lift. Anyone have or know of one anywhere?? Location not important but mainland uk. TIA
  18. RLC

    Plough breakers

    Who breaking ploughs these days? Anyone up north??
  19. RLC

    Wide angle pto shafts

    Are there any other brands worth looking at other than Comer and Walterscheid?? What are the BAre-co ones like?? I appreciate you get what you pay for but just though I’d check the market before I take out a mortgage!!‍♂️
  20. RLC

    RAF Scampton going north

    Anyone passing this area heading north ideally past York?? Bought a machine and power shaft not with it. Need shaft collecting. Would see whoever right with a few beer tokens!![emoji106]
Top