Search results

  1. Binc

    Mf Front dual control question

    2 years ago... :eek: starts about 14 mins
  2. Binc

    Mf Front dual control question

    May or may not be useful but Farmer phill did a walk through of setting it up on his 6499 last year for the front mower?
  3. Binc

    Simba freeflow

    @B R C
  4. Binc

    Solar panel failure

    think the barcode is specific serial number for that panel but there will be a manufactures label (ratings etc) on the back Also if its just one panel, removing it from the string is unlikely to cause problems -the inverter will have an acceptable range of voltage and current per string and you...
  5. Binc

    New toy day

    because there's two types... the ones you're familiar with shaped like this \ \ (perpendicular cutting edge that you flip) and others shaped like this / \ (opposing cutting edge like post 7850 and need changing on to different drum/disc) - I'm sure you can agree you don't treat both bladed...
  6. Binc

    Drum mower - free rotating saucer not rotating!

    if you haven't already, being upside down will make it much easier (the mower that is)
  7. Binc

    Fibre broadband ducting

    yes I would think so I wasn't planning on trying to do do more than one chamber at a time!
  8. Binc

    Fibre broadband ducting

    do you think it would do multiple lengths (from one chamber to the next)?
  9. Binc

    Fibre broadband ducting

    Been through the process above and BT have supplied ducting chambers (every 100m, turns etc.) for us to install, about 600m, what the easiest way of installing the draw cord...? Its 75mm duct roughly, short of dropping a stone tied to the end of the rope for each length is there a better way...
  10. Binc

    Mf25 Telehandler help please

    @masseybreaker ?
  11. Binc

    High Horsepower 4 cylinder engines

    but similar to the 6499 on the harrows wasn't it?
  12. Binc

    What is the point/purpose of square nuts?

    cheaper?
  13. Binc

    New farm house design

    whys isn't it more common to have mashing machine and tumble drier upstairs? saves carrying everything down and back up again (leaving it on the stairs)
  14. Binc

    New farm house design

    yes..?
  15. Binc

    Grassland Direct Drill

    @Kevtherev
  16. Binc

    Replacement Topper

    cordless grinder and a flap disc - every 8-10 hours more often if I clip something. I love our votex decent overlap of the blades and only 1 gearbox to worry about!
  17. Binc

    MF 8937 telehandler door latch

    Amazing thank you!!
  18. Binc

    MF 8937 telehandler door latch

    As above, i'm looking for a door latch assembly for a 02 registered MF8937 - its completely bust and looks like the below parts, ive tried those part numbers but haven't found a supplier, any suggestions? Built by Bobcat I believe? TIA!
  19. Binc

    Classics Earning their keep.

    Th the other side still does 🤭
  20. Binc

    Classics Earning their keep.

    Fiat also doing some ‘mintill’
Top