Search results

  1. Forever Fendt

    Planning Applications, PD and the like (General Chat)

    Is the barn in agricultural use at the moment or horticultural
  2. Forever Fendt

    Twin wall drain pipe - how much can it support?

    Dig the sides straight on the section you are putting the pipe and surround with granular fill ,Not ideal being in a V trench
  3. Forever Fendt

    Swimming pool help

    c Concrete floor with rebar in coming up sides ,hollow blocks filled and reinforced ,Rendered and then tiled
  4. Forever Fendt

    Swimming pool help

    one we did last year
  5. Forever Fendt

    Good places to buy a Steel RSJ

    We would charge £1.50 per Kgm plus £10 each to give you an idea
  6. Forever Fendt

    Steel price

    july 2020 was £460 per ton
  7. Forever Fendt

    Planning Applications, PD and the like (General Chat)

    perhaps one of the residents will own the track and grant a right of way to other users ,I have a right of way to a couple of fields and I only use them twice a year as there are other points of access but it does say in the deeds 'Right to pass over the land for agricultural purposes by the...
  8. Forever Fendt

    Planning Applications, PD and the like (General Chat)

    Very diplomatic ,I would probably tell him he's been released from duties and replaced with a more experienced consultant
  9. Forever Fendt

    whats the longest you can leave a new slab before cutting and filling joints?

    does the name start with Mac , i would be tempted to get it cut a little deeper than the norm after this time and make sure it’s cut to all the columns, don’t let anyone talk you into 12 m distance is ok , we did two runs down a shed on a saturday and filled middle on monday , cut the saturday...
  10. Forever Fendt

    whats the longest you can leave a new slab before cutting and filling joints?

    we cut it with in 24 hours if its not flicking any aggregate out especially this time of year , its been left far to long have you paid them if not they need educating ,has it been done with a laser screed
  11. Forever Fendt

    Steel price

    we’re using quite a bit to get those prices
  12. Forever Fendt

    Steel price

    £55 shot and paint £30 ish per ton cutting
  13. Forever Fendt

    Steel price

    2 quotes at £1200 best at £1160 this week all stockholder reductions on older stock thinking they have to much stock as demand has reduced significantly , For much more downward movement there will have to be some reductions from the mills and I can't see that been the case at the moment...
  14. Forever Fendt

    Roof sheet price difference

    fibre cement will be half the cost of a 0.7 with anti con backing
  15. Forever Fendt

    Post hole size for cattle shed gate posts?

    there is one at the floor level so it’s flush to top of socket and one 40 mm clear from bottom , they take up the difference between inside of socket and post , the bottom one set up so it doesn’t foul on anything in the bottom corners and they come out dead easy as not binding all the way up
  16. Forever Fendt

    Post hole size for cattle shed gate posts?

    you would be better with self locking yokes and not barriers that calves can get out of , Do TB whilst there locked in and clean back section out as well
  17. Forever Fendt

    Post hole size for cattle shed gate posts?

    have gates with adjustable eyes each end and use walking sticks through plates welded on post ,on the end you frequently open have nylock nut and leave eye floating and short pins so it always fits and if you want to swing gate other way you can
  18. Forever Fendt

    Build cost

    They should be able to commit to a price ,When the quote is accepted if orders are placed with suppliers they should hold prices ,Concrete panels , zed purlins, roof sheeting ,steel and cladding been delivered here weekly with prices fixed as far back as January
Top