Search results

i didnt take a picture but i fitted them as in the manual (see attached diagrams from left to right), the opening between the segments on the inside and they turn with the regular seed wheel until they lock in position. The intermediate wheel (big wheel driving the Gear wheel on sowing shaft...

When I fitted these small seed attachments i noticed it is putting more pressure on the drive mechanism, so I have removed. Has anyone else noticed this problem ?

For people interested here are 2 links for Fiona parts, 1 in Poland and 1 in Germany: https://agromer.pl/search/text=fiona/pl.html This Polish company will sell directly to you. https://www.kramp.com/shop-de/de/search/fiona?facetValues=sales_category%2BS%2Bweb1-4045064 Unfortunately, kramp will...

thanks

hi, If i understand this correctly, the options are the overlay product for existing wheels or small seed wheels. where can i buy the small seed wheels ?

Who manufactured Falcon ?

What size boards is on a kverneland match plough or do they vary?

yes, just the lever. I thought I would ask before attempting to make one.

Hi, I am looking for a lever for this valve chest. Can anyone identify the manufacturer of the attached valve chest. Or may be you have levers you are not using or a similar disused item? thanks

hi, I am trying to get off the disc on a Ransom plough and having removed the nut I cannot pull it off . Is there something else I need to do or do I just force it off.

Is there any way to recognise McGannon plates? Did McGannon leave any external signature mark on his plates ?

Many of these conversions seem to have been done in munster, do you remember which engineering company made the bell housing adaptor plate (I assume there was an adapter plate between the engine and bell housing) ?

In the conversions you are aware was the zetor 8011 clutches used or a heavier new clutch installed ?

is there some way of testing that before one buys a converted 8011 ?

were these 6354 conversions a success ? did the clutches need replacing as well ?

some 8011s here have Perkins 6354 engines, were the shipped from the factory with these engines or put in later?

Were any of the Zetor 8011 4WD ? Can the 2WD Zetor 8011 be easily converted to 4WD ?

Undercoat is primer. Its a summer job ,too damp here in winter without a heated spray booth which I dont have. If the paint stays on then its good enough for me. I prefer to avoid any sanding if possible. I just want to be able to soak the panels in something that will remove ALL the paint, I...

Lye to me is caustic soda. Have you successfully used this on tractor panels prior to undercoating or is there something else needed prior to undercoating?

I want to respray the panels and I am looking for the best way of removing the old paint. Most people do not recommend sand blasting for panels so I tested Oxalic acid but cannot easily remove the yellow residue, it is recommended to use apple vinegar but it does not seem sufficient. Does...