Search results

  1. GJG

    Rabe Power Harrow Shaft

    Main gearbox through shaft / stub shaft. The one out the back of gearbox that would have a pulley on it to drive a fan. Or heavy duty one so could run power Harrow on front linkage. Model Rabe PKE
  2. GJG

    JCB or similar digger

    JCB 3 to 6 ton digger on tracks wanted. Age not too important. Sensible hours. Tidy & well maintained if poss.
  3. GJG

    MF 6499 Spool Valves

    Massey 11 reg Fingertip spools , the datatronic ones, have stopped working. The red light is flashing a code which im told is lack or no power going to the spools. They work ok manually by using the small levers on the block. Is there a Fuse ? In the book it says 3 & 4 are fused , but all 4...
  4. GJG

    Rear Tractor Tyre

    Rear Tyre 710 70 42 wanted. Cheaper the better as only needed while one of mine is away being repaired
  5. GJG

    Tyre

    600 50 22.5 used tyre wanted. With or without rim
  6. GJG

    Stock Feed Potatoes

    Stock feed Potatoes , 100 tons available , cold stored , whole crop , no spurts/shoots £25 ton or negotiable for all of them. Ex farm Hereford.
  7. GJG

    Stock Feed Potatoes

    Stock feed Potatoes , 100 tons available , cold stored , whole crop , no spurts/shoots £25 ton or negotiable for all of them. Ex farm Hereford.
  8. GJG

    Massey 2640 .....................................2725

    Looking for a Massey , Any model in 2000 range. Or any American made Massey , older one
  9. GJG

    Power Harrow

    3 meter power Harrow wanted. Age not important. Good working order for light use. Has to have a through shaft on main gear box as will be front mounted
  10. GJG

    Folding Rollers with Shatter Boards

    Folding Rollers with Shatter Boards , aprox 6 or 8 meters wide.
  11. GJG

    Tyres front 4wd Tyres

    Tyres 600 x 60 30 front tyres , (new) Quotes please.
  12. GJG

    Massey 7480 or 7485 or 7490.

    Massey wanted.With Front linkage preferable. Condition more important than age
  13. GJG

    Grimme Multisep Wanted

    Grimme Multisep 2 or 4 shafts wanted , to put new 20mm rollers on them. Does someone have some or know of a breaker machine ? Cant find any at Len Evans or Grimme HQ , only new ones. Have posted in wanted section, but don't think many people look there.
  14. GJG

    Grimme Multisep

    Grimme Multisep 2 or 4 shafts wanted , to put new 20mm rollers on them. Does someone have some or know of a breaker machine ? Cant find any at Len Evans or Grimme HQ , only new ones.
  15. GJG

    Massey 7480 Wanted

    MF 7480 wanted preferably with front linkage & pto. Earlier one Under 20K Any size wheels / tyres as will go on row crops
  16. GJG

    Side Knife

    Motor or armature for a early Spaldings side knife. Or any parts for a early Spaldings one
  17. GJG

    Combination Drill 4.8 or 5 metre

    Combi Powerharrow one pass Wanted , Must have Disc coulters, NO Front Tank, Prefer mounted but would consider Trailed Amazone , Lemken , Kuhn . Rabe would be my choice
  18. GJG

    Massey Combine Power Flow Header

    Massey Combine Power Flow Header Wanted to fit Massey 38 combine. 20 foot preferred , good usable condition.
  19. GJG

    Tyres

    650 / 85 / 38 Two wanted , useable condition , perhaps off a set of duals
  20. GJG

    Fertiliser spreader / broadcaster: Other - Maxicast

    Fertiliser spreader / broadcaster: Other - Maxicast Category: Fertiliser spreader / broadcaster Manufacturer: Other Price: £1995 Condition: Used Description: Avadex Applicator. Air broadcaster , on a very heavy duty hyd X Grimme frame. Been used for mocap on potatoes. Set at 5.4 meters...
Top