Search results

It’s not my place to give more details. The OP is reading all the comments but is busy combining still.

I know all parties involved in this personally and the situation is exactly as the OP has stated. He is being careful how much information he posts on here so as not to identify those involved.

Difficult position with it being your partners parents but unfortunately if they continue to ignore your requests to pay go down the legal route with them to get the money.

Even harder to abuse a demonstration tractor these days as thanks to the linked software the dealer can now monitor what is going on with their tractor remotely.

Yes, had no problems with any of the straps I’ve had from there

If they use the same motors as the Vision XS machines we got ours done at GM Hydraulics here in Norfolk- 01362 693697. They were at that time service agents for the brand Standen used, can’t remember if it was Linde or Poclain though as it was a few years ago.

I have no ideas on the ins and outs of it, it was a mixture that I came across regularly on Pa6 courses especially with councils and amenity guys.

Be warned, with Chikara/Paradise the footprints of doom are more permanent than with Glyphosate 😆

You’d need to work out the area to treat then the quantities accordingly - application rate divide by 10000 x area to treat = quantity needed

A tank mix of glyphosate and a product called Chikara/Paradise should manage to do that. Quite a common mix used by amenity contractors for long term weed control.

I’ve had both a 2.2 and a 3.2 manual and the difference in fuel use is negligible however the difference in the amount of adblue used is very noticeable. The 3.2 used a lot less of it. The Ranger is a heavy truck so the larger engine doesn’t have to work as hard. It was after driving the 3.2 I...

At those hours I would think most of the main things had been done at least once depending on the workload it has had. Based on the one that we had where I used to work I would want to check the driveshaft between the engine and the gearbox at those hours for play in the joints - had one fail on...

Not at all, we have dealers as well as selling direct for some products so always have to be careful with posting pricing out of fairness.

I’ll have to keep you all in suspense until tomorrow I’m afraid as it’s not an item that I keep pricing on at home.

We are the U.K. suppliers for the Fledbag Funnel Box tote bins, there is an option to have a remote control battery operated opener if required as well. https://www.agrimarketia.com/product/fledbag-funnel-box/

Bought this 2016 D4 Graphite a few weeks ago to replace my Ranger. Had a set of Good Year Duratracs fitted today to replace the cheapos the dealer had fitted, handles better now!

I always found that a higher forward speed worked better as well once the beet were big enough to take it. Getting the hoe set right on the lift arms was always a challenge. Curved headlands could be as much fun as side hills until you got your eye in as well. Still preferred the rear...

Never had any problems with a rear mounted Kongskilde 12 row hoe. I used to have the mirrors set so I could see two of the units and where the guide discs were running at a glance. The same Fiat F140 done the drilling and the hoeing which helped. Went through 600 acres of beet numerous times for...

Ballpark figure would depend on what depth you wanted the machine to work to, the larger machines will chew away at larger boulders it just depends how large large is if that makes sense. Certainly makes a change from the usual arable and grassland kit. Even the smaller Leon machine can work to...

It’s crushing them, certain types of stone will break up smaller than others. Can be used for regrading farm tracks or in fields with models that can work up to 70cm deep. I work for the U.K. importer of the Valentini range so can answer any questions that you may have on them.